external start

More
18 May 2019 10:13 #134150 by bevins
Replied by bevins on topic external start

Bhushan wrote: i need help qickly


You didnt do what pl7i92 told you to do. Anyway, open halshow and see if your getting your input.

Please Log in or Create an account to join the conversation.

More
18 May 2019 10:17 #134151 by phoenix
Replied by phoenix on topic external start
i just dont understand what the hell u guys talking about i want simple instructions im nt scientist or somethig u morons

Please Log in or Create an account to join the conversation.

More
18 May 2019 10:50 #134157 by tommylight
Replied by tommylight on topic external start

Bhushan wrote: i just dont understand what the hell u guys talking about i want simple instructions im nt scientist or somethig u morons


???????? Really ?????

Please Log in or Create an account to join the conversation.

More
18 May 2019 10:51 #134159 by bevins
Replied by bevins on topic external start

Bhushan wrote: i just dont understand what the hell u guys talking about i want simple instructions im nt scientist or somethig u morons


There you go again calling people you don't know and trying to help you morons. Your more likely to get help if you dont call them names....lol

net cycle-start <= parport.0.pin-15-in halui.mode.auto halui.program.run
That will run the loaded program. open halshow, and you can see status of inputs and outputs and you can see if the button yopur pressing is getting to the controller.

Stop calling people morons.
The following user(s) said Thank You: tommylight

Please Log in or Create an account to join the conversation.

More
18 May 2019 10:53 #134160 by phoenix
Replied by phoenix on topic external start
net ext-machine-on halui.machine.on <= parport.0.pin-15-in
i am getting signal by this but machine simply doesnt do anything

Please Log in or Create an account to join the conversation.

Time to create page: 0.073 seconds
Powered by Kunena Forum