Considering building a small hobby CNC Plasma
26 Jan 2024 12:21 #291650
by RaSu
Replied by RaSu on topic Considering building a small hobby CNC Plasma
I'm looking for a new torch for my CNC plasma.
I cut a lot of 1mm sheet steel. I would be interested to know how high the cutting speed is on the Autocut A141 with the 0.8mm nozzles.
Unfortunately, even after hours of searching, I can't find anything about it.
Could you help me here.
I cut a lot of 1mm sheet steel. I would be interested to know how high the cutting speed is on the Autocut A141 with the 0.8mm nozzles.
Unfortunately, even after hours of searching, I can't find anything about it.
Could you help me here.
Please Log in or Create an account to join the conversation.
- tommylight
-
- Away
- Moderator
-
Less
More
- Posts: 19127
- Thank you received: 6406
26 Jan 2024 12:50 #291652
by tommylight
Replied by tommylight on topic Considering building a small hobby CNC Plasma
12m/m with 1.1mm nozzle at 60A, cutting 2mm mild steel
www.youtube.com/shorts/v7chn9W2rjw
www.youtube.com/shorts/v7chn9W2rjw
Please Log in or Create an account to join the conversation.
26 Jan 2024 13:05 #291653
by RaSu
Replied by RaSu on topic Considering building a small hobby CNC Plasma
If got a lot smal details with a lot direktional changes, therefore i woud kike to cut slower.
Mi goal woud be arround 3000-4000mm/min in 1mm mildsteal.
Mi goal woud be arround 3000-4000mm/min in 1mm mildsteal.
Please Log in or Create an account to join the conversation.
Time to create page: 0.064 seconds