Plasmac parport connections

phoenix
Topic Author
Offline
Premium Member

15 Jul 2019 08:12 #139380 by phoenix

Plasmac parport connections was created by phoenix

Sorry... Guys i know I'm doing same thing again as i posting this in another thread but what to do I'm so desperate to get ans
Someone will help me to make parport connections in plasmac
Or just tell me where to make them
Like hal file name

Please Log in or Create an account to join the conversation.

phillc54
Offline
Platinum Member

15 Jul 2019 08:33 #139384 by phillc54

Replied by phillc54 on topic Plasmac parport connections

linuxcnc.org/docs/devel/html/plasma/plasmac-user-guide.html

Please Log in or Create an account to join the conversation.

phoenix
Topic Author
Offline
Premium Member

15 Jul 2019 08:48 #139385 by phoenix

Replied by phoenix on topic Plasmac parport connections

I dont need user guide i read it already
PLS STOP CONFUSING ME AND JUST SIMPLY TELL ME HOW TO OR WHERE TO DO PARPORT CONNECTIONS IN YOUR DAMN CONFIG :angry:

Please Log in or Create an account to join the conversation.

phoenix
Topic Author
Offline
Premium Member

15 Jul 2019 08:53 #139386 by phoenix

Replied by phoenix on topic Plasmac parport connections

I also dont see plasmac configurator. Py

Please Log in or Create an account to join the conversation.

phoenix
Topic Author
Offline
Premium Member

15 Jul 2019 08:55 #139387 by phoenix

Replied by phoenix on topic Plasmac parport connections

You are providing jumbling info
And them blame me for posting too much questions..
I know that you are some kind of genius or teacher or something
But I'm not so next time you answer pls try to include
DO STEP AND DIR CONNECTIONS. HERE..........
THANK YOU

Please Log in or Create an account to join the conversation.

tecno
Offline
Platinum Member

15 Jul 2019 09:05 #139389 by tecno

Replied by tecno on topic Plasmac parport connections

Please stop acting like a child!! READ THE MANUAL !!!!!

4.6. Add PlasmaC To Base Machine
You need to have a fully tested and working base machine configuration before proceeding.

Is that so hard to understand?

The following user(s) said Thank You: phillc54, tommylight

Please Log in or Create an account to join the conversation.

phoenix
Topic Author
Offline
Premium Member

15 Jul 2019 09:21 - 15 Jul 2019 09:22 #139390 by phoenix

Replied by phoenix on topic Plasmac parport connections

Well ok i have a machine named my mill i run configrator and enter the following
Arc voltage hal pin pin 11 in
Float sw 10 in
Is this right????
In hal I chose mymill. Hal

Last edit: 15 Jul 2019 09:22 by phoenix.

Please Log in or Create an account to join the conversation.

phoenix
Topic Author
Offline
Premium Member

15 Jul 2019 09:30 #139392 by phoenix

Replied by phoenix on topic Plasmac parport connections

Also i m unable to share pics due to high quality of my mob camera....
Admin is great
Waht the hell i need to type inside arc voltage hal pin and float sw hal pin

Please Log in or Create an account to join the conversation.

phoenix
Topic Author
Offline
Premium Member

15 Jul 2019 09:31 #139393 by phoenix

Replied by phoenix on topic Plasmac parport connections

You are blaming me for posting continuesly
But thats why forums are made to discuss knowledge amd NOW I'M NOT GONNA STOP UNTIL I GET MY ANSWER

Please Log in or Create an account to join the conversation.

phillc54
Offline
Platinum Member

15 Jul 2019 09:39 #139394 by phillc54

Replied by phillc54 on topic Plasmac parport connections

For the float switch enter the hal name of the parport pin you have connected the float switch to.
What are you using to sample the arc voltage?

Please Log in or Create an account to join the conversation.

Time to create page: 0.124 seconds