PlasmaC encoder .00.velocity question

  • tommylight
  • tommylight's Avatar
  • Away
  • Moderator
  • Moderator
More
10 Mar 2021 19:00 #201685 by tommylight
Replied by tommylight on topic PlasmaC encoder .00.velocity question

Madness meaning never ending changes......

I got that right, but i will chalk that to "knowing you" from all the reading i do here.

Please Log in or Create an account to join the conversation.

  • bevins
  • bevins's Avatar Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
10 Mar 2021 20:08 #201694 by bevins
Replied by bevins on topic PlasmaC encoder .00.velocity question


Madness meaning never ending changes......


Hard to tell tone via written media sometimes. But it seems like you might be complaining that there's active development/bug fixes, etc. on free, open source software.....


Nah Nah, I wasn't complaining at all. Actually was kind of a dry joke. Obviously not that funny..... But was meant that I have a hard time keeping up. Not negative in any way.

Please Log in or Create an account to join the conversation.

More
10 Mar 2021 20:42 - 10 Mar 2021 20:42 #201706 by snowgoer540
Replied by snowgoer540 on topic PlasmaC encoder .00.velocity question


Madness meaning never ending changes......


Hard to tell tone via written media sometimes. But it seems like you might be complaining that there's active development/bug fixes, etc. on free, open source software.....


Nah Nah, I wasn't complaining at all. Actually was kind of a dry joke. Obviously not that funny..... But was meant that I have a hard time keeping up. Not negative in any way.


Copy that, noted for next time... I like to try to give the benefit of the doubt. Party on :)

At any rate, QtPlasmaC is getting pretty close! But maybe hold off for the customer build. Plus you could sell an upgrade service ;) haha. Or so the Apple method of free updates for life, and you’ll seem like a hero..
Last edit: 10 Mar 2021 20:42 by snowgoer540.

Please Log in or Create an account to join the conversation.

Time to create page: 0.056 seconds
Powered by Kunena Forum