[DONE]Testers needed for integration of switchable kinematics
- nhanpham
-
- Offline
- Senior Member
-
Less
More
- Posts: 77
- Thank you received: 1
21 Dec 2021 18:25 - 06 Jul 2022 23:31 #229682
by nhanpham
Replied by nhanpham on topic [DONE]Testers needed for integration of switchable kinematics
hi,
Last edit: 06 Jul 2022 23:31 by nhanpham.
Please Log in or Create an account to join the conversation.
- Aciera
-
Topic Author
- Offline
- Administrator
-
Less
More
- Posts: 4819
- Thank you received: 2177
22 Dec 2021 09:18 - 22 Dec 2021 09:28 #229736
by Aciera
Replied by Aciera on topic [DONE]Testers needed for integration of switchable kinematics
Ok, so it is limited to your python remap code.
Unfortunately I don't have enough insight into the inner workings of LinuxCNC to be of any help trying to figure this out.
Maybe somebody else comes along with more knowledge.
Since this is really a double post it's probably best to just end the discussion about this issue here and see what others have suggested in the other thread: forum.linuxcnc.org/38-general-linuxcnc-q...p-execute-can-t-work
Unfortunately I don't have enough insight into the inner workings of LinuxCNC to be of any help trying to figure this out.
Maybe somebody else comes along with more knowledge.
Since this is really a double post it's probably best to just end the discussion about this issue here and see what others have suggested in the other thread: forum.linuxcnc.org/38-general-linuxcnc-q...p-execute-can-t-work
Last edit: 22 Dec 2021 09:28 by Aciera.
Please Log in or Create an account to join the conversation.
Time to create page: 0.150 seconds