Cut Rifling Machine Help

4 years 8 months ago #234526 by andypugh

Replied by andypugh on topic Cut Rifling Machine Help

hoffb77 wrote:
I am planning to build a machine to turn feed screws with an accelerating pitch.

You might find this interesting:
youtube.com/watch?v=ACvRilmIKDQ
Though it seems that the linked write-up has bitrotted.
There is something here:
wiki.linuxcnc.org/cgi-bin/wiki.pl?JMKsFusee

Please Log in or Create an account to join the conversation.

4 years 8 months ago #234537 by hoffb77

Replied by hoffb77 on topic Cut Rifling Machine Help

I need a taper on the infeed side as well. Many different sizes... This is great! Thank you for the link.

Please Log in or Create an account to join the conversation.

2 years 3 months ago #304304 by estas

Replied by estas on topic Cut Rifling Machine Help

What was the result? Were you able to start the machine?

Please Log in or Create an account to join the conversation.

2 years 3 months ago #304306 by estas

Replied by estas on topic Cut Rifling Machine Help

Hi Andy ; can you send me your mail adress or facebook or insatgram ..

Please Log in or Create an account to join the conversation.

Time to create page: 0.323 seconds