HELP - 3D CNC design & running programs & PCs.

RodW has a nice video on youtube covering a lot of things, Talla has plenty of videos in German, i have some build videos of not much use, AndyPugh has some nice videos of what LinuxCNC can do.
If you search for LinuxCNC on youtube there are plenty of very informative videos (can not recall user name of one with very detailed videos, shame on me).

Youtube:
Toma berisha
Toma cnc
Toma 3d
Instagram:
Toma.cnc
Toma.3d
Toma.pc

tommylight wrote:

Windows has no realtime anything.
Windows is bad for machines.
LinuxCNC does not need controllers, it is a machine controller, so no 8 bit or 32 bit controller required.
You need:
A PC with parallel port OR a Mesa board, drives and motors.

lol  Linux good, Windows BAD....
 

bevins wrote:

lol  Linux good, Windows BAD....

LOL, i do complicate stuff !
Especially since i wasted over 15 years of my life dealing, professionally mind you, with all kinds of cr@p MS has showed into it using .... ah, nevermind, never ever again.

instead of leaving all of them in one place ,a linux user finds ways to make it more complicated :DD!

shpatb wrote:

instead of leaving all of them in one place ,a linux user finds ways to make it more complicated :DD!

But at least the linux user can print to his printer without his OS complaining about imaginary errors that do not exist. Or worse GPF to a blue screen when printing....

rodw wrote:

But at least the linux user can print to his printer without his OS complaining about imaginary errors that do not exist. Or worse GPF to a blue screen when printing....

That brings back some painful memories ....