Database of configuration files: Milling machine, lathes plasma
- besriworld
- Offline
- Elite Member
-
Less
More
- Posts: 250
- Thank you received: 70
28 Jun 2023 09:59 #274381
by besriworld
Database of configuration files: Milling machine, lathes plasma was created by besriworld
Let's make a database of configuration files for different machines.
Example:
I think it will be an interesting topic for all beginners like me.I hope the topic becomes interesting
Example:
- Machine name and photo.
- Hardware used and brief description.(Controller, driver, motor , panel ,ATC and other)
I think it will be an interesting topic for all beginners like me.I hope the topic becomes interesting
Please Log in or Create an account to join the conversation.
- cakeslob
- Offline
- Platinum Member
-
Less
More
- Posts: 798
- Thank you received: 231
28 Jun 2023 18:16 #274410
by cakeslob
Replied by cakeslob on topic Database of configuration files: Milling machine, lathes plasma
Second this.
I know we have the configuration tools, but its equally helpful when theres a known working config that you can get insight from. The hal stuff is a daunting task for some
I was having a hard time finding an example of a lathe with threading ability, I think I found one config in the samples
I know we have the configuration tools, but its equally helpful when theres a known working config that you can get insight from. The hal stuff is a daunting task for some
I was having a hard time finding an example of a lathe with threading ability, I think I found one config in the samples
The following user(s) said Thank You: besriworld
Please Log in or Create an account to join the conversation.
- spumco
- Offline
- Platinum Member
-
Less
More
- Posts: 1829
- Thank you received: 738
29 Jun 2023 00:33 #274421
by spumco
Replied by spumco on topic Database of configuration files: Milling machine, lathes plasma
Third this.
I don't know what framework would be appropriate for a library or DB, but I know I've collected numerous configs over the past couple years trying to understand the whole LCNC thing.
Having a repository of working - and even non-working - configs would be very helpful:
Even if this idea blossoms and then dies from lack of participation or curating... the information is still (likely) valid years later.
I don't know what framework would be appropriate for a library or DB, but I know I've collected numerous configs over the past couple years trying to understand the whole LCNC thing.
Having a repository of working - and even non-working - configs would be very helpful:
- Understanding - or at least exposure to - different HAL setups and writing styles
- Reducing the Easter-egg-hunt when looking for an example of a specific function or behavior
- Seeing whats involved in more complicated machines (4-5 axis, live tool lathes, ATC of all flavors)
- User-authored comps in one place - the wiki has some useful comps, but there are dozens of useful comps littered across the forum yet are essentially invisible unless you have lots of time on your hands to search
Even if this idea blossoms and then dies from lack of participation or curating... the information is still (likely) valid years later.
The following user(s) said Thank You: besriworld
Please Log in or Create an account to join the conversation.
- tommylight
-
- Away
- Moderator
-
Less
More
- Posts: 19462
- Thank you received: 6529
29 Jun 2023 11:17 #274440
by tommylight
Replied by tommylight on topic Database of configuration files: Milling machine, lathes plasma
Spammer booted.
Please Log in or Create an account to join the conversation.
- besriworld
- Offline
- Elite Member
-
Less
More
- Posts: 250
- Thank you received: 70
29 Jun 2023 13:54 - 29 Jun 2023 13:55 #274450
by besriworld
Replied by besriworld on topic Database of configuration files: Milling machine, lathes plasma
Well, if you think the topic is not needed... you can delete it! I see you can do it !
The other members seem to think the same way. 160 views and no configuration faile
The other members seem to think the same way. 160 views and no configuration faile
Last edit: 29 Jun 2023 13:55 by besriworld.
Please Log in or Create an account to join the conversation.
- meister
- Offline
- Platinum Member
-
Less
More
- Posts: 491
- Thank you received: 309
29 Jun 2023 14:24 - 29 Jun 2023 14:25 #274453
by meister
Replied by meister on topic Database of configuration files: Milling machine, lathes plasma
good idea !
maybe we can use a github repository:
maybe we can use a github repository:
Mill
/Name
README.md
halfiles
photos
....
Lathe
/Name
...
Last edit: 29 Jun 2023 14:25 by meister.
Please Log in or Create an account to join the conversation.
- cakeslob
- Offline
- Platinum Member
-
Less
More
- Posts: 798
- Thank you received: 231
29 Jun 2023 14:27 #274454
by cakeslob
Replied by cakeslob on topic Database of configuration files: Milling machine, lathes plasma
bersi, I dont think he was referring to you or the topic, there are many spammers on the forum.
The General Questions section is also not the appropriate place for such a database. I like meisters suggestion, thats also what I was thinking, but spumco raises a good point about curation
The General Questions section is also not the appropriate place for such a database. I like meisters suggestion, thats also what I was thinking, but spumco raises a good point about curation
Please Log in or Create an account to join the conversation.
- tommylight
-
- Away
- Moderator
-
Less
More
- Posts: 19462
- Thank you received: 6529
29 Jun 2023 16:07 #274461
by tommylight
It was a spam message that was deleted to inform the others that are subscribed to this topic as they get email alerts and come here and find nothing.
-
I think this topic can remain in general questions, but the one with uploads should be probably in "show your stuff".
The reason being there are very small chances of having configs that just work for others, the possibilities are huge, and there is always the risk of someone using a config that might do harm in another machine, think enabling servos at full tilt or heaters or hydraulics or ....
Still, after all that, i always upload configs with all my machines as it absolutely should go without saying "use at your own risk".
@Besri,
Make a new topic in "show your stuff" probably named "working configs database" or similar, so we can have pictures/videos with attached configs there, and leave this one for discussion about those configs.
Does that seem OK?
Thank you.
Replied by tommylight on topic Database of configuration files: Milling machine, lathes plasma
That was not for you.Well, if you think the topic is not needed... you can delete it! I see you can do it !(
It was a spam message that was deleted to inform the others that are subscribed to this topic as they get email alerts and come here and find nothing.
-
I think this topic can remain in general questions, but the one with uploads should be probably in "show your stuff".
The reason being there are very small chances of having configs that just work for others, the possibilities are huge, and there is always the risk of someone using a config that might do harm in another machine, think enabling servos at full tilt or heaters or hydraulics or ....
Still, after all that, i always upload configs with all my machines as it absolutely should go without saying "use at your own risk".
@Besri,
Make a new topic in "show your stuff" probably named "working configs database" or similar, so we can have pictures/videos with attached configs there, and leave this one for discussion about those configs.
Does that seem OK?
Thank you.
The following user(s) said Thank You: JT
Please Log in or Create an account to join the conversation.
- besriworld
- Offline
- Elite Member
-
Less
More
- Posts: 250
- Thank you received: 70
29 Jun 2023 18:55 - 29 Jun 2023 19:06 #274465
by besriworld
Replied by besriworld on topic Database of configuration files: Milling machine, lathes plasma
Yes, I misunderstood the post. I apologize ! Yes, it would be very stupid if someone just copied things they don't understand. About now I started work on a lathe with AC servo motors step/direction control and mesa card 7i98 plus my custom I/O board. I am going through many basic problems which I solve by searching the forum. - many hours in search, this lost time can be saved if there is a database of working projects, I hope it will be of help to all new members.
Yes, it is a good idea to upload them to github .
You can open a new topic with first configuration. And keep the topic locked and transfer opinions with a configuration from this one
Yes, it is a good idea to upload them to github .
You can open a new topic with first configuration. And keep the topic locked and transfer opinions with a configuration from this one
Last edit: 29 Jun 2023 19:06 by besriworld.
The following user(s) said Thank You: tommylight
Please Log in or Create an account to join the conversation.
- tommylight
-
- Away
- Moderator
-
Less
More
- Posts: 19462
- Thank you received: 6529
29 Jun 2023 19:39 #274466
by tommylight
Thank you.
Replied by tommylight on topic Database of configuration files: Milling machine, lathes plasma
It is your idea, so it deserves your name there.You can open a new topic with first configuration.
It is better to keep it opened so users can upload their stuff, and whatever should not be there we can transfer here.And keep the topic locked and transfer opinions with a configuration from this one
Thank you.
The following user(s) said Thank You: besriworld
Please Log in or Create an account to join the conversation.
Time to create page: 0.066 seconds