QT Dragon crashes - new installation

I have a working setup (QTdragon_hd gui) on a converted 3 axis mill (PM-940V).  I am attempting to setup a additiona/new dual boot machine that I can use as a backup and place to test new configurations.

I have a fresh debian 12 install and have installed LinuxCNC from the package manager. The installation seems to be fine and the axis sim works like I expect but any time I load a qt dragon (or qt dragon hd) sim the gui display seems to start like I would expect but most of the screen seems to be frozen.  Some functions work (sometimes I can select different tabs).  copying the error log seems to be not letting me post, but if there is a good way to attach it, please let me know.  In addition to the error log, when I click the exit button I get a notification that python3 has stopped responding and an option to wait or force quit.

Any help is appreciated


 

report attached. I am suspicious that I am missing python3 packages (not sure why?) but I do not know how to identify what is missing.

Thanks again for the help

 

Can you run from a terminal and post the output?

Here is the terminal output:

dustin@Debiandual:~$ linuxcnc ~/linuxcnc/configs/sim.qtdragon.qtdragon_xyz/qtdragon_inch.ini
LINUXCNC - 2.9.0~pre1+git20230208.f1270d6ed7
Machine configuration directory is '/home/dustin/linuxcnc/configs/sim.qtdragon.qtdragon_xyz'
Machine configuration file is 'qtdragon_inch.ini'
Starting LinuxCNC...
linuxcnc TPMOD=tpmod HOMEMOD=homemod EMCMOT=motmod
Note: Using POSIX non-realtime
Found file(lib): /usr/share/linuxcnc/hallib/core_sim.hal
Found file(lib): /usr/share/linuxcnc/hallib/simulated_home.hal
QSocketNotifier: Can only be used with threads started with QThread
[QTvcp.QTVCP.WIDGETS.STATUS_LABEL][WARNING] lbl_maxv_percent : no option recognised (status_label.py:162)
[QTvcp.QTVCP.WIDGETS.STATUS_LABEL][WARNING] lbl_max_rapid : no option recognised (status_label.py:162)
[QTvcp.QTVCP.WIDGETS.STATUS_LABEL][WARNING] lbl_runtime : no option recognised (status_label.py:162)
ngcgui: make_fileset: [Errno 2] No such file or directory: '/home/dustin/nc_files/ngcgui_lib/slot.ngc'
ngcgui: make_fileset: [Errno 2] No such file or directory: '/home/dustin/nc_files/ngcgui_lib/qpocket.ngc'

 Here is the output when I run the sim/example directly from the interface that launches when i run linuxcnc (instead of the version that is saved to my linuxcnc directory as above). Both examples have the same behavior (i.e. gui freezes and python crashes on exit)

 

I don;t see anything jumping out.
Can you open a terminal and type:
qtvcp test_panel

and see if a panel shows.

Here is the terminal output:

dustin@Debiandual:~$ qtvcp test_panel
tool_mmap_user(): tool mmap not available
poll(): continuing without tool mmap data
QSocketNotifier: Can only be used with threads started with QThread
qt.qpa.wayland: Wayland does not support QWindow::requestActivate()
qt.qpa.wayland: Wayland does not support QWindow::requestActivate()
qt.qpa.wayland: Wayland does not support QWindow::requestActivate()
qt.qpa.wayland: Wayland does not support QWindow::requestActivate()
qt.qpa.wayland: Wayland does not support QWindow::requestActivate()
qt.qpa.wayland: Wayland does not support QWindow::requestActivate()
qt.qpa.wayland: Wayland does not support QWindow::requestActivate()
qt.qpa.wayland: Wayland does not support QWindow::requestActivate()



The repeated warning would display anytime I hovered over the Dial Range or LED Sound menu selection (not sure if that helps)

Additionally, there was "Terminal" pop up window that displayed:
"terminal program urxvt not available. Try sudo apt install rxvt-unicode-256color"

Obviously i can attempt to install rxvt-unicode-256color but I'm not sure if this is a symptom of additional missing packages or an install issue.

Thanks again for the help.

I should add that all of the functions in the qtvcp test panel seem to work and python3 does not crash/stop responding on exit like it does when exiting the qt_dragon displays.

I am using GNOME.