Choosing AC vs. DC for stepper motor drivers

22 Dec 2024 20:23 #317157 by rodw

Replied by rodw on topic Choosing AC vs. DC for stepper motor drivers

The ETC86 is an Ethercat drive. This is the config I use

github.com/rodw-au/linuxcnc-cia402
you will need to modify it to work for you.

Please Log in or Create an account to join the conversation.

23 Dec 2024 00:34 #317163 by resmond

Replied by resmond on topic Choosing AC vs. DC for stepper motor drivers

That's awesome - as always!

I've already starting to dig through it.

Please Log in or Create an account to join the conversation.

Time to create page: 0.081 seconds