is 40V enough for DM556?
- langdons
- Offline
- Elite Member
-
Less
More
- Posts: 202
- Thank you received: 21
05 Feb 2025 15:57 #320760
by langdons
Replied by langdons on topic is 40V enough for DM556?
For some reason, the negative lead of the original rectifier was connected to ground.
I do not know why.
I do not know why.
Please Log in or Create an account to join the conversation.
- langdons
- Offline
- Elite Member
-
Less
More
- Posts: 202
- Thank you received: 21
05 Feb 2025 16:20 #320765
by langdons
Replied by langdons on topic is 40V enough for DM556?
Ok then.
I will use the existing toroidal tranformer (3 isolated windings each 28.5VAC) and run the DM556 on 38.5VDC from my rectifier and run the 2 DM860 drivers on 57VAC.
Thanks.
I will use the existing toroidal tranformer (3 isolated windings each 28.5VAC) and run the DM556 on 38.5VDC from my rectifier and run the 2 DM860 drivers on 57VAC.
Thanks.
Please Log in or Create an account to join the conversation.
Time to create page: 0.160 seconds