bandit controller retrofit

tommylight
Online
Moderator

03 Apr 2025 17:53 #325633 by tommylight

Replied by tommylight on topic bandit controller retrofit

Mesa 7i95T can do step/dir and encoders on one board.
And just to make sure, take some pictures of drive to motor wiring and post them here so we can confirm it is OK, preferably before powering on the drive!

The following user(s) said Thank You: Masiwood123

Please Log in or Create an account to join the conversation.

Masiwood123
Topic Author
Offline
Platinum Member

03 Apr 2025 21:16 #325641 by Masiwood123

Replied by Masiwood123 on topic bandit controller retrofit

Thank you very much,i managed to move the motors, I don't have any cards or PC at the moment with Mesa and linuxcnc so I tried it via Mach3 and it works great, according to your suggestion, i just have to put in a stronger DC power supply like 80v and limit the drivers to 4a because of the bipolar connection. video in the attachment`` Cheers

www.instagram.com/reel/DH_4KRPKSii/?utm_source=ig_web_copy_link

The following user(s) said Thank You: tommylight

Please Log in or Create an account to join the conversation.

Time to create page: 0.252 seconds