Forum Menu

Huanyang VFD and Mesa 7i76e stuck at 6000 rpm

More
6 years 3 months ago #175353 by PCW
Replied by PCW on topic Huanyang VFD and Mesa 7i76e stuck at 6000 rpm
since that's within a percent or so it should be fine

Please Log in or Create an account to join the conversation.

More
5 years 3 months ago #214161 by Sadmeatball
Replied by Sadmeatball on topic Huanyang VFD and Mesa 7i76e stuck at 6000 rpm
Hi, Nils

I'm on my way to pair Huayang Vfd to mesa 7i76e

I also connected the same as andypough explained

My question is what do you mean by "i had to set the Jumper on my VFD from 2&3 to 1&2 "?

Please enlighten me..

Big Thanks

Cakra

Please Log in or Create an account to join the conversation.

More
5 years 3 months ago #216265 by hodianmkr
Replied by hodianmkr on topic Huanyang VFD and Mesa 7i76e stuck at 6000 rpm
@sadmeatball - see the explanation here

www.diycncdesign.com/linuxcnc-2.8-huanyang-vfd.html

Please Log in or Create an account to join the conversation.

Moderators: cmorley
Time to create page: 0.055 seconds
Powered by Kunena Forum