Maho MH 500W4 Retrofit

Martin87
Offline
Senior Member

4 years 8 months ago #235723 by Martin87

Replied by Martin87 on topic Maho MH 500W4 Retrofit

ich habe ein weiteres Problem:

Debug file Information

Pin `hm2.0.7i77.0.0.output-00` does not exist

steht da sobald ich CNCLinux öffnen möchte,
wir kommen leider nicht weiter

Please Log in or Create an account to join the conversation.

Aciera
Offline
Administrator

4 years 8 months ago #235724 by Aciera

Replied by Aciera on topic Maho MH 500W4 Retrofit

Bitte die ganze debug info sowie .hal und .ini files posten.

Please Log in or Create an account to join the conversation.

tommylight
Offline
Moderator

4 years 8 months ago #235725 by tommylight

Replied by tommylight on topic Maho MH 500W4 Retrofit

Mesa board has no filed power, it requires 8-28V field power for the I/O to work.

Please Log in or Create an account to join the conversation.

Martin87
Offline
Senior Member

4 years 8 months ago #235730 by Martin87

Replied by Martin87 on topic Maho MH 500W4 Retrofit

[attachment=44138 wrote: linuxcnc.report.txt[/attachment]Aciera post=235724 userid=25994"]Bitte die ganze debug info sowie .hal und .ini files posten.
Wir hatten die Feldspannung noch nicht angeschlossen, aber nach dem anschliesen kam immer noch der gleiche Fehler. Danke schonmal fuers nachsehen.

File Attachment:
File Name: Mahome_is_...howa.ini
File Size:4 KB

File Attachment:
File Name: Mahome_is_...howa.hal
File Size:11 KB

File Attachment:
File Name: linuxcnc.report.txt
File Size:7 KB

Please Log in or Create an account to join the conversation.

Martin87
Offline
Senior Member

4 years 8 months ago #235731 by Martin87

Replied by Martin87 on topic Maho MH 500W4 Retrofit

WIr haben es jetzt geschaft, Danke hat sich erledigt,wir haben bei der 7i92H den falschen Stecker angeschlossen :-)

The following user(s) said Thank You: tommylight

Please Log in or Create an account to join the conversation.

Moderators: Muecke

Time to create page: 0.183 seconds