Si vous avez besoin de traduire anglais/francais et vice versa demandez moi

• jay1st
• Topic Author
• Offline
• Premium Member
• 

Less More

• Posts: 127
• Thank you received: 17

6 years 5 months ago #169166 by jay1st

Replied by jay1st on topic Si vous avez besoin de traduire anglais/francais et vice versa demandez moi

yeah 6 years ago.......these files are outdated i guess

Please Log in or Create an account to join the conversation.

• andypugh
• Offline
• Moderator
• 

Less More

• Posts: 19311
• Thank you received: 4655

6 years 5 months ago #169175 by andypugh

Replied by andypugh on topic Si vous avez besoin de traduire anglais/francais et vice versa demandez moi

The "updating_linuxcnc" file is especially important for 2.8. A lot has changed.

Please Log in or Create an account to join the conversation.

• andypugh
• Offline
• Moderator
• 

Less More

• Posts: 19311
• Thank you received: 4655

6 years 5 months ago #169176 by andypugh

Replied by andypugh on topic Si vous avez besoin de traduire anglais/francais et vice versa demandez moi

(The good news is, that at the end you will know more about LinuxCNC than almost anyone_

Please Log in or Create an account to join the conversation.