Button on Linuxcnc interface that switches an output on Mesa 7i76e on and off

DerKlotz
Offline
Senior Member

13 Oct 2025 12:08 #336376 by DerKlotz

Replied by DerKlotz on topic Button on Linuxcnc interface that switches an output on Mesa 7i76e on and off

THANK YOU VERY MUCH

After a little bit testing and understanding i got the output to work

The following user(s) said Thank You: tommylight, rodw

Please Log in or Create an account to join the conversation.

DerKlotz
Offline
Senior Member

22 Oct 2025 13:58 #336879 by DerKlotz

Replied by DerKlotz on topic Button on Linuxcnc interface that switches an output on Mesa 7i76e on and off

Hello,
you answered one of my posts. Can you help me installing the right kernel. I don´t know how to do it.

"Try repeating after typing
sudo apt purge raspi-firmware
If you still gets errors, share the output of uname -r as it appears it is trying to install an incorrect kernel version. "

I got this message 6.1.0-30-rt-amd64

Please Log in or Create an account to join the conversation.

andypugh
Offline
Moderator

22 Oct 2025 14:20 #336881 by andypugh

Replied by andypugh on topic Button on Linuxcnc interface that switches an output on Mesa 7i76e on and off

I think 6.1.0-30-rt should probably be OK. (though I think that the packages were built on 6.1.0.10-rt )

Please Log in or Create an account to join the conversation.

DerKlotz
Offline
Senior Member

23 Oct 2025 11:21 #336952 by DerKlotz

Replied by DerKlotz on topic Button on Linuxcnc interface that switches an output on Mesa 7i76e on and off

Thanks, i installed a new linux

Please Log in or Create an account to join the conversation.

Moderators: HansU

Time to create page: 0.075 seconds