LinuxCNC on Debian Stretch
- skunkworks
- Offline
- Moderator
-
Less
More
- Posts: 361
- Thank you received: 150
26 Jun 2017 19:01 #95000
by skunkworks
Replied by skunkworks on topic LinuxCNC on Debian Stretch
I am just a messenger.. But will pass along the praise 
sam
sam
Please Log in or Create an account to join the conversation.
26 Jun 2017 20:01 #95002
by tecno
Replied by tecno on topic LinuxCNC on Debian Stretch
Need some help here.
did install via netinst CD image (i386) ( swedish install)
how do I get LinuxCNC-uspace installed? sudo apt-get install linuxcnc-uspace = cannot find package
did install via netinst CD image (i386) ( swedish install)
how do I get LinuxCNC-uspace installed? sudo apt-get install linuxcnc-uspace = cannot find package
Please Log in or Create an account to join the conversation.
26 Jun 2017 20:20 #95003
by grump
Replied by grump on topic LinuxCNC on Debian Stretch
Add the jessy repository to /etc/apt/sources .list and update.
Please Log in or Create an account to join the conversation.
26 Jun 2017 20:27 - 26 Jun 2017 20:29 #95005
by grump
Replied by grump on topic LinuxCNC on Debian Stretch
But did you not download and install the new livecd that Sam has put here?
www.linuxcnc.org/testing-stretch-amd64-rtpreempt/
www.linuxcnc.org/testing-stretch-amd64-rtpreempt/
Last edit: 26 Jun 2017 20:29 by grump.
Please Log in or Create an account to join the conversation.
26 Jun 2017 20:37 #95006
by tecno
Replied by tecno on topic LinuxCNC on Debian Stretch
is this for older i386 machine, Hp Elite Book?
Please Log in or Create an account to join the conversation.
26 Jun 2017 21:00 #95008
by tecno
Replied by tecno on topic LinuxCNC on Debian Stretch
Found it !
Please Log in or Create an account to join the conversation.
26 Jun 2017 21:00 #95009
by grump
Replied by grump on topic LinuxCNC on Debian Stretch
I don't see why not but don't quote me on that.
What harm can trying do?
What harm can trying do?
Please Log in or Create an account to join the conversation.
26 Jun 2017 21:30 #95010
by tecno
Replied by tecno on topic LinuxCNC on Debian Stretch
Install is working now, tomorrow install in workshop on milling machine.
Thanks for help
Thanks for help
Please Log in or Create an account to join the conversation.
26 Jun 2017 21:34 #95011
by grump
Replied by grump on topic LinuxCNC on Debian Stretch
You're welcome, good luck with it.
Please Log in or Create an account to join the conversation.
22 Jul 2017 17:29 #96288
by vre
Replied by vre on topic LinuxCNC on Debian Stretch
linuxcnc 2.7.10 works on debian stretch with rtai kernel ?
Please Log in or Create an account to join the conversation.
Time to create page: 0.190 seconds