(superseeded) Linuxcnc on Linux Mint 19.3 quick and easy installation

rodw wrote: your http looks malformed. Try http:// ?

It works for me.

That's the reason I've been sticking to the 4.19.106 kernel, good latency, nice and stable and had no issues at all whilst running jobs.

BeagleBrainz wrote: That's the reason I've been sticking to the 4.19.106 kernel, good latency, nice and stable and had no issues at all whilst running jobs.

Just did the same on the original post.

I have the ISO kernels here:

Kernel as used on the 19.3 ISO
cnc.beaglebrainz.net/mintcnc/pool/2.8-rt...t46-lcnc-1_amd64.deb
cnc.beaglebrainz.net/mintcnc/pool/2.8-rt...t46-lcnc-1_amd64.deb

Kernel as used on the 19.2 ISO
cnc.beaglebrainz.net/mintcnc/pool/2.8-rt...t44-lcnc-1_amd64.deb
cnc.beaglebrainz.net/mintcnc/pool/2.8-rt...t44-lcnc-1_amd64.deb

I will try that next time (I have another machine on which I need to install once this one is running in its place temporarily).
Tommylight wrote it as a 19.2 installation with 2.8 so I took the instructions that followed as being for 19.3 rather than the stated 19.2
Cheers
Paul

Use this image with Linuxcnc pre installed
cnc.beaglebrainz.net/cdimage/cnc-19.3.0-...lus-uspace-64bit.iso

DO NOT SELECT OEM INSTALL