LinuxCNC on Raspberry Pi 5

Cant do this anymore bye all wrote:

As far as I have been able to see there has been no major hardware updates to the RPi5. Or are you referring to the ability to boot from NVME ?
 

I think there has been a lot of improvement under the hood including making the 6.12 kernel available.But yeh, not something you can really see.

Just got info from 2 suppliers that there are 16GB RPi 5 for sale. No mention of any other hardware updates.

Cant do this anymore bye all wrote:

Just got info from 2 suppliers that there are 16GB RPi 5 for sale. No mention of any other hardware updates.

8 gb should be heaps. I havenever used more than 4 gb

Stand by. Trying to make a new pi5 image with all of our learnings
 

I just thought it was a little ironic as I posted about not being able to find any reference to any major hardware changes.

I have made a mistake. I thought the kit I bought gave no *physical^ access to the SD card. But, it does.
My apologies for the trouble and misunderstanding.

Tom

hahaha

These things happen.

We're making some headway towards getting a 6.12 kernel going with rod's image builder.
But despite what the recent skuttlebutt suggests for arm platforms it seems that some patches are still required for realtime.