Latest Official LinuxCNC ISO

More
2 years 9 months ago - 1 year 8 months ago #290032 by tommylight
LinuxCNC 2.9.3 Debian 12 Bookworm PREEMPT-RT ISO

www.linuxcnc.org/iso/linuxcnc_2.9.4-amd64.hybrid.iso

ASUS ROG Crosshair VIII Impact - AMD X570
Last edit: 1 year 8 months ago by tommylight. Reason: link
The following user(s) said Thank You: deanforbes

Please Log in or Create an account to join the conversation.

More
2 years 9 months ago #290033 by rodw
Replied by rodw on topic Latest Official LinuxCNC ISO
Its probably easier to find from the downloads page
linuxcnc.org/downloads/

Please Log in or Create an account to join the conversation.

More
2 years 9 months ago #290034 by tommylight
Yes it is, but that does not change the fact that probably half of our members wander here first as google is pointing them.

ASUS ROG Crosshair VIII Impact - AMD X570
The following user(s) said Thank You: randypetersen

Please Log in or Create an account to join the conversation.

More
2 years 9 months ago #290576 by daveyr
Replied by daveyr on topic Latest Official LinuxCNC ISO
As a FYI this seems to have brltty installed in it. This causes problems with ShuttleXpress and also the waveshare RS485 USB adapters.

To remove brltty
sudo apt-get remove brltty

This was from the ISO link above and run as a fresh install.

Please Log in or Create an account to join the conversation.

More
2 years 9 months ago #290595 by rodw
Replied by rodw on topic Latest Official LinuxCNC ISO
There must beĀ  a bug in the Debian Live installer as we tell it to suspress Britty installation so that instruction must be ignored.

Please Log in or Create an account to join the conversation.

More
2 years 9 months ago #290601 by tommylight
Linux (most distros) will install "brltty" whenever they detect a keyboard with added functionality, like extra buttons or fingerprint reader or smart card reader, etc.
It will not install when a plain keyboard is used.

ASUS ROG Crosshair VIII Impact - AMD X570
The following user(s) said Thank You: daveyr

Please Log in or Create an account to join the conversation.

Time to create page: 0.255 seconds
Powered by Kunena Forum