Latest Official LinuxCNC ISO

Hello,

I follow this guide :  LinuxCNC install for Debian Bookworm on x86 - Google Docs

But i'm losing my ethernet connection (RTL8111 chipset) to mesa card... if i do sudo systemctl restart networking it start working again for some time and the it go down again.

 

please try

sudo apt install dkms
sudo apt install r8168-dkms
reboot.

Please refer to point 40 and on in my help document
docs.google.com/document/d/1jeV_4VKzVmOI...diY/edit?usp=sharing

rodw wrote:

please try

sudo apt install dkms
sudo apt install r8168-dkms
reboot.

Please refer to point 40 and on in my help document
docs.google.com/document/d/1jeV_4VKzVmOI...diY/edit?usp=sharing

I do:
sudo apt install dkms
sudo apt install r8168-dkms

But is the same.

I didn't do step 35/36/37 it can be that?

What is the best PCIe netword card so don't have the problems ?
 

Look for an intel card.
You can also try the kernel I built. The reason I put it first is that DKMS drivers need to be built for the specific kernel you use so it is quicker to add the lernel first.

Do you know if the Intel Ethernet Network Adapter I225-T1 works well?

Or what card do you recomend?
 

rodw wrote:

please try

sudo apt install dkms
sudo apt install r8168-dkms
reboot.

Please refer to point 40 and on in my help document
docs.google.com/document/d/1jeV_4VKzVmOI...diY/edit?usp=sharing

Tryed the steps 35/36/37 but its the same.... installed the Linux Mint Debian Edition 6 with the rt kernel and linuxcnc 2.10 and so far no problem.

What intel card do you suggest?