3D printed stuff, showcase it here

More
2 years 2 weeks ago #311920 by spumco
Replied by spumco on topic 3D printed stuff, showcase it here
Mill belt & drawbar cover with drawbar button.  It's not going to stop some sort of catastrophic belt/pulley failure from coming through, but it should keep most chips & coolant out of that area.  The assembly is remarkably stiff once the mounting screws are snugged down.

Assembly is about 11" (280mm) tall for size reference.  ABS, printed pretty hot for decent layer adhesion.  Surprisingly little warping.

 
The following user(s) said Thank You: tommylight, my1987toyota

Please Log in or Create an account to join the conversation.

More
2 years 2 weeks ago #311952 by tommylight
Replied by tommylight on topic 3D printed stuff, showcase it here
Looks like it came from the factory with it, cool! :)

Please Log in or Create an account to join the conversation.

More
1 year 8 months ago #322332 by my1987toyota
Replied by my1987toyota on topic 3D printed stuff, showcase it here
The frame of my Voron 2.4 350mm cubed
 
The following user(s) said Thank You: tommylight, rodw

Please Log in or Create an account to join the conversation.

More
1 year 8 months ago #322372 by tommylight
Replied by tommylight on topic 3D printed stuff, showcase it here
Welcome to the dark side! :)
The following user(s) said Thank You: my1987toyota

Please Log in or Create an account to join the conversation.

More
1 year 5 months ago #327582 by tommylight
Replied by tommylight on topic 3D printed stuff, showcase it here
3D printed a lot of drone propellers, mostly not good or to heavy, but finally found some that are very usable, so guy named Logan on youtube, link to his video and files is on my video

Lots of mishaps went on there ... :)
The following user(s) said Thank You: my1987toyota

Please Log in or Create an account to join the conversation.

More
1 year 2 weeks ago #336524 by tommylight
Replied by tommylight on topic 3D printed stuff, showcase it here
Some of the drones i have built, and more in the works, mostly 3D printed
The following user(s) said Thank You: my1987toyota

Please Log in or Create an account to join the conversation.

Time to create page: 0.661 seconds
Powered by Kunena Forum