Tool change problem probe not detected (solved)

More
7 years 21 hours ago #149311 by newbynobi
Replied by newbynobi on topic Tool change problem probe not detected
Toolchange command should be something like this

G40
G49
T1 M6
G43
S3600 M3
M8

Norbert

Please Log in or Create an account to join the conversation.

More
7 years 19 hours ago #149322 by Gaunt1969
Replied by Gaunt1969 on topic Tool change problem probe not detected
I cannot thank you enough, That was it.
Why did I not get that?

Norbert
I have to say for me this has been a very productive but frustrating learning experience.
Thank you for clearing up my ignorance on this issue. And for all the hard work you put into Gmoccapy and linuxcnc

Please Log in or Create an account to join the conversation.

More
7 years 8 hours ago #149344 by newbynobi
Replied by newbynobi on topic Tool change problem probe not detected
You are welcome!

Norbert

Please Log in or Create an account to join the conversation.

Moderators: newbynobi, HansU
Time to create page: 0.148 seconds
Powered by Kunena Forum