Forum Menu

Spindle Load feedback in Gmoccapy

More
4 years 2 months ago #250844 by CNC_Tux
Replied by CNC_Tux on topic Spindle Load feedback in Gmoccapy
LinuxCNC 2.8.3

Please Log in or Create an account to join the conversation.

More
4 years 2 months ago #250845 by zz912
Replied by zz912 on topic Spindle Load feedback in Gmoccapy
HansU made it for Python 3. You must remake it for Python 2. Or you should ask somebody for remake. I am Interested for version 2.8 too.

Please Log in or Create an account to join the conversation.

More
4 years 2 months ago #250849 by CNC_Tux
Replied by CNC_Tux on topic Spindle Load feedback in Gmoccapy
Dear ZZ,
i didnt mean the new one.
I mean this one :

 

Please Log in or Create an account to join the conversation.

More
4 years 2 months ago #250850 by CNC_Tux
Replied by CNC_Tux on topic Spindle Load feedback in Gmoccapy
i mean exactly this one:

 

Cheers
Reinhard

Please Log in or Create an account to join the conversation.

More
4 years 2 months ago #250851 by zz912
Replied by zz912 on topic Spindle Load feedback in Gmoccapy
Pins are here:
linuxcnc.org/docs/html/gui/gmoccapy.html#_spindle_feedback_pins

Do you use postgui.hal ?

Please Log in or Create an account to join the conversation.

More
4 years 2 months ago #250853 by CNC_Tux
Replied by CNC_Tux on topic Spindle Load feedback in Gmoccapy
i can see the pins in the hal show, if i make a link,
i get a fault message " pin or Signal doesnt exist"
I took a look into the sim examples ... noting in the hal, but the pins are linked.
Postgui.hal, i think is an idea to take a look inside

Please Log in or Create an account to join the conversation.

Moderators: newbynobi, HansU
Time to create page: 0.450 seconds
Powered by Kunena Forum