Gmoccapy 3.5.0 - opinions needed

newbynobi wrote:

Midnight Commander / Norton Commander:
Yes I was thinking about a two parted window where you may select in each window a different content and with the bottom button it should be possible to copy, rename, move ore load the content of the selected file.

Hmm I think a split view is not so suitable here as this is only to load files. i think for copy or move operations you should use the systems file manager. But renaming could be supported.

Aciera wrote:

This file gives me this. Still an emtpy tool list:


How are you accessing those properties, through the gstat-module?

Yes: github.com/LinuxCNC/linuxcnc/commit/5838...f0ddf6aa125c0885dcde

Maybe a bug in gstat then. It seems to work in QtDragon but I have no idea if that uses the same module. Chris would likely be the one to ask.

change_tool() in Gremkin's StatCanon class is not getting called for some reason.

@Hansu

Copy and move might be needed by lot of people, as transferring part programs with USB Stick is quite useful even not being up to date
If only one file manager, than we should think about the buttons to copy / paste and change the location with the existing button.

Norbert

Yes, this is a useful feature, thanks!

So have now put all and only the the information of the G-code properties in that Tab.
I only have not decided yet whether to take the provided time format or parsed to (HH:)MM:SS (2).

Furthermore I think to add the elapsed time of the program next to the progress bar (1). I think this fits well there.

For the tabs - I think it is the best to just remember the last open tab and use this one at the next start than to configure with which one to start.