Forum Menu

Gmoccapy 3.5.0 - opinions needed

More
1 year 5 months ago #329352 by Aciera
Replied by Aciera on topic Gmoccapy 3.5.0 - opinions needed
Yes, that is my alterego on github.

Please Log in or Create an account to join the conversation.

More
1 year 3 months ago - 1 year 3 months ago #331727 by besriworld
Replied by besriworld on topic Gmoccapy 3.5.0 - opinions needed
The estimated program execution time is not working for me.





ps: I also get this error when I try to enter the calibration menu
ps2 : This error coming when the machine has completed the homing procedure. If I haven't done the homing procedure, I can open the calibration menu.

 
 
Last edit: 1 year 3 months ago by besriworld.

Please Log in or Create an account to join the conversation.

More
1 year 3 months ago #331777 by Aciera
Replied by Aciera on topic Gmoccapy 3.5.0 - opinions needed
The issue with the error is being dealt with:
github.com/LinuxCNC/linuxcnc/issues/3510
The following user(s) said Thank You: besriworld

Please Log in or Create an account to join the conversation.

More
1 year 3 months ago #331856 by besriworld
Replied by besriworld on topic Gmoccapy 3.5.0 - opinions needed
Small update. When there is no g96 /G95 command in the program, the program calculates the approximate time correctly. Maybe feed per rev is not calculated correctly. Thanks for the great work! I understand that this problem is not in the field of gmoccapy

Please Log in or Create an account to join the conversation.

Moderators: newbynobi, HansU
Time to create page: 0.115 seconds
Powered by Kunena Forum