Python Interface Feed Hold

The python interface feed hold doesn't work for some reason. I can watch the feed hold status change from false to true but the program keeps running in a feed move.

Anyone have a clue what's wrong?

Edit: M53 is on.

JT

 

Maybe you need to enable fedd-hold and/or issue a G53?

linuxcnc.org/docs/stable/html/gcode/m-code.html#mcode:m53

M53 is enabled and I can see feed hold toggle from false to true in the status.

The only thing in the python interface is set_feed_hold(int), I don't see any other way to enable is except M53.

JT

Maybe the Python interface is exactly the same as a G53, in that all it does is enable the feed-hold HAL pin?

Thanks I'll check in a bit.

JT

Toggling M53 and toggling the set_feed_hold from the python interface don't change motion.feed-hold. Even setting motion.feed-hold to true doesn't stop feed moves.

Edit: motion.feed-inhibit stops all motion feed and rapid

JT