Configuring a Floating Head

LINUXCNC - 2.8.0-36-ge08d61243 Machine configuration directory is '/home/user/linuxcnc/configs/plasma_cutter' Machine configuration file is 'plasma_cutter.ini' Starting LinuxCNC... twopass:invoked with <> options twopass:found ./plasma_cutter.hal twopass:found ././plasmac/plasmac.tcl twopass:found ./plasma_cutter_connections.hal Note: Using POSIX realtime hm2: loading Mesa HostMot2 driver version 0.15 hm2_eth: loading Mesa AnyIO HostMot2 ethernet driver version 0.2 hm2_eth: ERROR: 10.10.10.10: Could not retrieve mac address hm2_eth: rtapi_app_main: Resource temporarily unavailable (-11) twopass: load_the_modules cmd=<orig_loadrt hm2_eth [concat board_ip="10.10.10.10"] [concat config=" num_encoders=1 num_pwmgens=0 num_stepgens=5 sserial_port_0=00xxxx"]> waitpid failed /usr/bin/rtapi_app hm2_eth /usr/bin/rtapi_app exited without becoming ready insmod for hm2_eth failed, returned -1 Shutting down and cleaning up LinuxCNC... hm2: unloading Note: Using POSIX realtime LinuxCNC terminated with an error. You can find more information in the log: /home/user/linuxcnc_debug.txt and /home/user/linuxcnc_print.txt as well as in the output of the shell command 'dmesg' and in the terminal