Hello, I'm back again with some more issues. we got the configuration working and everything,last time. and i finally got the design program all worked out and the g-code worked out. So naturally its testing time. Today was going to be the firs cut but everything would go right until the torch had to fire. Which it wouldnt do, so i thought about it a bit and realized i put the torch fire on the wrong output when setting up plsamc. so i went back to reconfigure it, well i typed it wrong and now it wont let me reconfigure. im getting these error messages
When opening Linuxcnc:
(i was going to copy and paste it here but for some reason i cant copy or paste erro messages from linux so there are picture linked)
imgur.com/a/gpia5al
When i try to edit the plasmac again:
Code:
Traceback (most recent call last):
File "linuxcnc/configs/plasma_cutter/configurator.py", line 517, in on_create_clicked
self.reconfigure()
File "linuxcnc/configs/plasma_cutter/configurator.py", line 1801, in reconfigure
shutil.copy(newConex, oldConex)
File "/usr/lib/python2.7/shutil.py", line 119, in copy
copyfile(src, dst)
File "/usr/lib/python2.7/shutil.py", line 83, in copyfile
with open(dst, 'wb') as fdst:
IOError: [Errno 13] Permission denied: '/home/user/linuxcnc/configs/plasma_cutter/plasma_cutter_connections.hal.bakr'
