Configuring a Floating Head

In plasma_cutter.ini change:
to:
Sorry I didn't realise it was an embedded tab.

Yay it’s working! Thank you very much again. I have one more issue I can see now though. It says Home Axis where it use to say home all. I have a tandem axis set up so I can’t home them individually. How do I get it to have them all home (z-axis being immediate home), I think this is an issue because like I said I only have one limit switch for the z axis and it’s on the floating head so it’s not set to home and limit shared

That would require every joint to have a home sequence, so in the ini file in the existing [JOINT_N] sections, something like:
For any joint that you manually move to a home position, make sure the below items don't exist or are commented out:

It worked. It seems I’m all set. Thank you very much. I really appreciate it

Great, now you can do some cutting and tuning...

I may have accidentally lied. So I have a picture I converted into g-code, I plugged that in to see if it all worked. My z axis isn’t moving though. It didn’t move at all. I was expecting a touch off as is suppose to happen with a floating head but nothing. I may just have converted the g code wrong. All the Inkscape videos are weird

You need a spindle o on command to start the probe sequence. PlasmaC remove all Z commands as it handle all the Z axis height.
Open one of the example files made for Plasmac, they are installed with LinuxCNC.

I can’t find them. Is there a link to download them?

When you go to open a file they should be in a subdirectory named plasmac.

Their real location is /usr/share/linuxcnc/ncfiles/plasmac/