Update help ---- PoKeys No moore

forum.linuxcnc.org/9-installing-linuxcnc...-nearly-easy-install

So is the 19.3 install I did OK or not?

You said 20 and posted the stuff for 19.3.
This is for 19.3:
forum.linuxcnc.org/9-installing-linuxcnc...nd-easy-installation

This is for 20:
forum.linuxcnc.org/9-installing-linuxcnc...-nearly-easy-install

If you do not get the grub menu at boot:
launchpad.net/~danielrichter2007/+archiv...untu/grub-customizer
Use that to make the default kernel at boot the RT one.

I got it

bengt@CNC3000:~$ uname -a
Linux CNC3000 4.9.0-13-rt-amd64 #1 SMP PREEMPT RT Debian 4.9.228-1 (2020-07-05) x86_64 x86_64 x86_64 GNU/Linux
bengt@CNC3000:~$


Tomorrow I will try to get Touch working

I would keep your existing OS which has preemptRT on it already. I could not get Mint 2.0 going with Tommy;s shortcut. If you do go that way, I would search for his 19.3 version which I know works.

Hi Rod,

I will go with 19.3, Yesterday was enough pissing around trying to fix the SSD from INTENSO. I do believe that the extra flash is very damaged.

So now I have something to report.

1. Touch did work out of the box but needs to be calibrated.

2. My cycles tab does not work = no graphics
Can this be an issue of converted hal/ini from 2.7.14 to 2.8?
3. Camera issues

Here mpv is run stand alone and cross-hairs are OK


Here mpv in gmoccapy and cross-hair is not as it should be
How to rotate picture 90° ?

The problem above looks to be problems with Mint.

Below here 2 screenshots with Debian 10 LCNC and it just works.



Only thing I have not figured out yet is how to rotate the webcam 90

EMBED_TAB_COMMAND = mpv /dev/video0 --wid {XID} --vf-add=drawbox=-1:2:-1:240:t=1 --vf-add=drawbox=2:-1:320:-1:t=1 --no-border

I will install a new Debian 10 on the now formatted SSD and see if I can get TOUCH working.

tecno wrote: Only thing I have not figured out yet is how to rotate the webcam 90

EMBED_TAB_COMMAND = mpv /dev/video0 --wid {XID} --vf-add=drawbox=-1:2:-1:240:t=1 --vf-add=drawbox=2:-1:320:-1:t=1 --no-border

It's in the manual.

tecno wrote: I will install a new Debian 10 on the now formatted SSD and see if I can get TOUCH working.

Good decision, will make your life a lot easier in the future.

Maybe you can start a new topic with each problem. This topic is getting messy and it's unusable for future reference for other users with same problems.