Update help ---- PoKeys No moore

More
5 years 9 months ago #195646 by tecno
Replied by tecno on topic Update help ---- TOUCH
I am getting nowhere trying to install drivers.


So back to basics.
Code:
bengt@CNC3000:/dev/input/by-id$ ls usb-eGalax_Inc._USB_TouchController-event-if00 usb-Riitek_Micro_Keyboard-if01-event-mouse usb-Riitek_Micro_Keyboard-event-if01 usb-Riitek_Micro_Keyboard-if01-mouse usb-Riitek_Micro_Keyboard-event-kbd bengt@CNC3000:/dev/input/by-id$

The touch screen works but is not calibrated to be useful.
My question is what calibrator to use and where put calibration data.

Help would be appreciated.

Please Log in to join the conversation.

More
5 years 9 months ago #195650 by Hakan
Replied by Hakan on topic Update help ---- TOUCH
Have you looked here?
www.eeti.com/drivers_Linux.html

It might not even be the right device though.

Please Log in to join the conversation.

More
5 years 9 months ago #195653 by tecno
Replied by tecno on topic Update help ---- TOUCH
Yes I have and can not get it to work.

Please Log in to join the conversation.

More
5 years 9 months ago #195667 by tommylight
Replied by tommylight on topic Update help ---- TOUCH
Does it work on Mint 19.3 ?

Please Log in to join the conversation.

More
5 years 9 months ago #195681 by tecno
Replied by tecno on topic Update help ---- TOUCH
Not tested

Please Log in to join the conversation.

More
5 years 9 months ago #195760 by andypugh
Replied by andypugh on topic Update help ---- TOUCH
Try xinput-calibrator

sudo apt-get install xinput-calibrator

It appears as "Calibrate Touchscreen" in the menu.

Please Log in to join the conversation.

More
5 years 9 months ago #195762 by tecno
Replied by tecno on topic Update help ---- TOUCH
Done that but calibration data will not stick.
Have tried both ways saving to
/etc..... 99 conf
/usr......40 conf

Is it maybe so that the data should be somewhere else?

Please Log in to join the conversation.

More
5 years 9 months ago #195763 by andypugh
Replied by andypugh on topic Update help ---- TOUCH
I think that you can paste it straight in to Xorg,conf.

But by default I don't think that xorg,conf exists.

Xorg --configure

will set it up. But you apparently need to run that with X not running. I am not 100% sure how you do that, but I imagine that the internet knows.

Please Log in to join the conversation.

More
5 years 9 months ago #195769 by tecno
Replied by tecno on topic Update help ---- TOUCH
Well that did not work, the configure can not detect the USB touch.

Please Log in to join the conversation.

More
5 years 9 months ago #195775 by andypugh
Replied by andypugh on topic Update help ---- TOUCH
What is "the configure" ?

Please Log in to join the conversation.

Time to create page: 0.585 seconds
Powered by Kunena Forum