Forum Menu

Installing from linuxcnc-2.8.0-buster.iso fails via USB

More
4 years 11 months ago #225818 by probotix
Replied by probotix on topic Installing from linuxcnc-2.8.0-buster.iso fails via USB
Do you have a current set of working commands?

Please Log in or Create an account to join the conversation.

More
4 years 11 months ago - 4 years 11 months ago #226149 by andypugh
Replied by andypugh on topic Installing from linuxcnc-2.8.0-buster.iso fails via USB
Code:
sudo lb config sudo lb build
Seems to work for me.

But I suspect that you need the right things in your apt sources so that it can get all the packages.

Code:
deb http://deb.debian.org/debian/ buster non-free contrib main deb-src http://deb.debian.org/debian/ buster non-free contrib main deb http://security.debian.org/debian-security/ buster/updates main deb-src http://security.debian.org/debian-security/ buster/updates main deb http://www.linuxcnc.org/ buster base deb-src http://www.linuxcnc.org/ buster base deb http://www.linuxcnc.org/ buster 2.8-rt
Last edit: 4 years 11 months ago by andypugh.

Please Log in or Create an account to join the conversation.

More
4 years 11 months ago #226167 by probotix
Replied by probotix on topic Installing from linuxcnc-2.8.0-buster.iso fails via USB
Thanks Andy. Got it working. My VirtualBox install keeps losing time when it goes to sleep. Resynced the time and it works like a champ. Now working on our preseeder. Let me know if you wanna see it.

Please Log in or Create an account to join the conversation.

More
4 years 11 months ago #226650 by probotix
Replied by probotix on topic Installing from linuxcnc-2.8.0-buster.iso fails via USB
Hey Andy! Really digging buster-live-build, especially after swapping out binary_syslinux to solve the splash screen issue.

Have you ever figured out how to make live-build recompile the iso without cleaning and re-downloading everything again?

Please Log in or Create an account to join the conversation.

More
4 years 11 months ago #226795 by andypugh
Replied by andypugh on topic Installing from linuxcnc-2.8.0-buster.iso fails via USB

Have you ever figured out how to make live-build recompile the iso without cleaning and re-downloading everything again?
I seem to recall that sometimes it just works, and sometimes not. 

I suggest subscribing to the debian-live mailing list. It's very low traffic. 
 

Please Log in or Create an account to join the conversation.

More
4 years 5 months ago #243947 by probotix
Replied by probotix on topic Installing from linuxcnc-2.8.0-buster.iso fails via USB
buster-live-build has quit working. I havent needed to touch it in 9 months or so. Do you know if they fidgeted with the addresses for the update servers again?

Please Log in or Create an account to join the conversation.

Time to create page: 0.074 seconds
Powered by Kunena Forum