Plasmac 758 topics

A place to ask questions about the Plasmac interface

Subject	Replies / Views	Last Post
Plasma cutter Startup Error Category: Plasmac Topic started 6 years 6 months ago, by Riggorous Last Post 6 years 6 months ago by Riggorous	Replies:2 Views:1372	Last Post by Riggorous 6 years 6 months ago
Plasmac 7i96 and thcad setup Category: Plasmac Topic started 6 years 7 months ago, by jay1st Last Post 6 years 6 months ago by jay1st 1 2	Replies:18 Views:5158	Last Post by jay1st 6 years 6 months ago
RTPREEMPT vs RTAI Category: Plasmac Topic started 6 years 7 months ago, by snowgoer540 Last Post 6 years 6 months ago by snowgoer540 1 2 3 4	Replies:36 Views:7980	Last Post by snowgoer540 6 years 6 months ago
Upgrading from 30 to 45xp Category: Plasmac Topic started 6 years 7 months ago, by JTknives Last Post 6 years 6 months ago by Uthayne	Replies:8 Views:1641	Last Post by Uthayne 6 years 6 months ago
plasmac ground Category: Plasmac Topic started 6 years 7 months ago, by billykid Last Post 6 years 6 months ago by billykid	Replies:4 Views:1428	Last Post by billykid 6 years 6 months ago
No Z Motion On Probe or Probe Test - DRO Indicates Motion Category: Plasmac Topic started 6 years 7 months ago, by mustbme Last Post 6 years 7 months ago by phillc54 1 2 3 4	Replies:30 Views:7024	Last Post by phillc54 6 years 7 months ago
New pin motion.base-feedrate in master branch Category: Plasmac Topic started 6 years 7 months ago, by rodw Last Post 6 years 7 months ago by rodw 1 2 3 ... 6	Replies:54 Views:10.4k	Last Post by rodw 6 years 7 months ago
PlasmaC torch starting problem (Solved with help from the famous three) Category: Plasmac Topic started 6 years 7 months ago, by Clive S Last Post 6 years 7 months ago by tommylight 1 2 3 ... 12	Replies:119 Views:23.1k	Last Post by tommylight 6 years 7 months ago
Configurator Syntax error. Category: Plasmac Topic started 6 years 7 months ago, by rodw Last Post 6 years 7 months ago by phillc54	Replies:3 Views:1344	Last Post by phillc54 6 years 7 months ago
gtksourceview2 import error: solved Category: Plasmac Topic started 6 years 7 months ago, by CNCFred Last Post 6 years 7 months ago by phillc54	Replies:9 Views:1904	Last Post by phillc54 6 years 7 months ago
Error on startup of PlasmaC, does the torch need power? Category: Plasmac Topic started 6 years 7 months ago, by CNCFred Last Post 6 years 7 months ago by phillc54	Replies:4 Views:1326	Last Post by phillc54 6 years 7 months ago
Moving PlasmaC to another PC Category: Plasmac Topic started 6 years 7 months ago, by Clive S Last Post 6 years 7 months ago by tommylight	Replies:1 Views:1250	Last Post by tommylight 6 years 7 months ago
Re: # set to double the value in the corresponding joint Category: Plasmac Topic started 6 years 7 months ago, by Clive S Last Post 6 years 7 months ago by islander261	Replies:9 Views:1421	Last Post by islander261 6 years 7 months ago
configurator.py throws error when clicking on "create" Category: Plasmac Topic started 6 years 7 months ago, by Christoph Last Post 6 years 7 months ago by phillc54	Replies:2 Views:1420	Last Post by phillc54 6 years 7 months ago
contour on Pipe Category: Plasmac Topic started 6 years 8 months ago, by bbsr_5a Last Post 6 years 8 months ago by tommylight	Replies:7 Views:2045	Last Post by tommylight 6 years 8 months ago
Plasmac install.... Windows convert from start to finish Category: Plasmac Topic started 6 years 8 months ago, by robertspark Last Post 6 years 8 months ago by phillc54 1 2 3 ... 7	Replies:68 Views:12.9k	Last Post by phillc54 6 years 8 months ago
Ohmic sensing question Category: Plasmac Topic started 6 years 8 months ago, by PCW Last Post 6 years 8 months ago by thefabricator03	Replies:9 Views:1796	Last Post by thefabricator03 6 years 8 months ago
Why f/32 for THCAD? Category: Plasmac Topic started 6 years 8 months ago, by Lunkwill Last Post 6 years 8 months ago by PCW	Replies:5 Views:1593	Last Post by PCW 6 years 8 months ago
How to integrate PlasmaC into a configuration build with StepConf wizard Category: Plasmac Topic started 6 years 8 months ago, by CFE Last Post 6 years 8 months ago by thefabricator03 1 2	Replies:15 Views:3880	Last Post by thefabricator03 6 years 8 months ago
THCAD-300 and Hypertherm (65) Category: Plasmac Topic started 6 years 8 months ago, by snowgoer540 Last Post 6 years 8 months ago by rodw 1 2 3	Replies:20 Views:5801	Last Post by rodw 6 years 8 months ago

Time to create page: 0.051 seconds