Profile for tincho80

Offline

User Type: User
Rank: New Member

Register Date: 30 Nov 2020
Last login: 9 months 4 days ago
Time Zone: UTC +1:00
Local Time: 10:01

Posts: 16
Profile views: 4

Gender: Unknown
Birthdate: Unknown

tincho80's recent posts (16 messages )

	Subject	Replies / Views	Last Post

	Machine from LinuxCNC 2.8.4 to LinuxCNC 2.9.8 not working anymore Category: General LinuxCNC Questions Topic started 9 months 1 week ago, by tincho80 Last Post 9 months 1 week ago by tincho80	Replies:4 Views:949	Last Post by tincho80 9 months 1 week ago
	Machine from LinuxCNC 2.8.4 to LinuxCNC 2.9.8 not working anymore Category: General LinuxCNC Questions Topic started 9 months 1 week ago, by tincho80 Last Post 9 months 1 week ago by tincho80	Replies:4 Views:949	Last Post by tincho80 9 months 1 week ago
	Machine from LinuxCNC 2.8.4 to LinuxCNC 2.9.8 not working anymore Category: General LinuxCNC Questions Topic started 9 months 1 week ago, by tincho80 Last Post 9 months 1 week ago by tincho80	Replies:4 Views:949	Last Post by tincho80 9 months 1 week ago
	hostmot2 oneshot bitfile help Category: Advanced Configuration Topic started 3 years 10 months ago, by roland Last Post 3 years 5 months ago by PCW 1 2 3 4	Replies:36 Views:7245	Last Post by PCW 3 years 5 months ago
	hostmot2 oneshot bitfile help Category: Advanced Configuration Topic started 3 years 10 months ago, by roland Last Post 3 years 5 months ago by PCW 1 2 3 4	Replies:36 Views:7245	Last Post by PCW 3 years 5 months ago
	hostmot2 oneshot bitfile help Category: Advanced Configuration Topic started 3 years 10 months ago, by roland Last Post 3 years 5 months ago by PCW 1 2 3 4	Replies:36 Views:7245	Last Post by PCW 3 years 5 months ago
	hostmot2 oneshot bitfile help Category: Advanced Configuration Topic started 3 years 10 months ago, by roland Last Post 3 years 5 months ago by PCW 1 2 3 4	Replies:36 Views:7245	Last Post by PCW 3 years 5 months ago
	Auto Tool Measurement setup,makes gmoccapy slow and difrent configation, Category: Advanced Configuration Topic started 3 years 6 months ago, by Kasper-001 Last Post 3 years 3 months ago by Kasper-001 1 2 3	Replies:22 Views:4986	Last Post by Kasper-001 3 years 3 months ago
	Auto Tool Measurement setup,makes gmoccapy slow and difrent configation, Category: Advanced Configuration Topic started 3 years 6 months ago, by Kasper-001 Last Post 3 years 3 months ago by Kasper-001 1 2 3	Replies:22 Views:4986	Last Post by Kasper-001 3 years 3 months ago
	Auto Tool Measurement setup,makes gmoccapy slow and difrent configation, Category: Advanced Configuration Topic started 3 years 6 months ago, by Kasper-001 Last Post 3 years 3 months ago by Kasper-001 1 2 3	Replies:22 Views:4986	Last Post by Kasper-001 3 years 3 months ago

Time to create page: 0.621 seconds

Powered by Kunena Forum