Anyone beta testing Pathpilot 2.0?

The bigger sliders are SO much better. Easy to use on the touchscreen now for sure.

Are they mapping an image now as the slider handle or is a glade update? I am not too knowledgable on glade other than using it for modding pathpilot.

My USB stick is here... so I dont reinvent the wheel... sharmstr, I see lots has changed in the file structure. Any pointers to get it up and running in sim mode on a VM?

Since the USB Stick is a bootable device you should be able to build a VM and select it as your boot device then follow the normal PP install. Once it's up follow the normal stuff to get to a gui and then edit the config files and change it to a sim config.

"Since the USB Stick is a bootable device you should be able to build a VM and select it as your boot device" You can, but you need to install Plop Boot Manager since VB doesnt have boot to USB.

"edit the config files and change it to a sim config" Not needed anymore.

Check this out: www.cnczone.com/forums/tormach-pathpilot...tor.html#post2111468

Ok, the VM wasn't specified so my reply was in general. my understanding is VB can do this but its not in the GUI create the vdisk manaully VBoxManage internalcommands createrawvmdk -filename ~/usb1.vmdk -rawdisk /dev/usb1
once you do that you start VB normally and use the ~/usb1.vmdk Vdisk you created to boot your VM from

i might be missing it but they talked in that thread about sim and using a VM. you dont' need a VM to run the sim. just use a config file included for example tormach_lathe_sim the script that starts PP parses the name and if it has sim in it will not load the mesa stuff and goes into sim mode. not need to do a VM unless you want the extra work. someone in that thread tried pointing that out and got talked over so no one picked it up