Snuggly's Plasma Build

@Grotius, I love how dynamic linuxcnc is, however it suffers from a pretty steep learning curve.

Alright, my box is almost fully wired up, I need to drill some larger holes for my coax connectors. I shouldn't need to shield the relay to the torch, right?

I have to switch back and forth between Windows and Linux to get a solid internet connection, that's why my responses are spread out. I'm hoping to have the whole machine moving tonight and I'll work on both the Toma and THCUD just to have options.

Snuggly,

If you have a solid state relais, you wont have trouble. If you have a spool relays on hf start you won't have trouble with
hd plasma because this inverters are good isolated. Maybe your inverter is cheaper and not so good isolated. You will
find out. In the past i spend a lot of money to find out what is working. After that i bought a pilot start plasma solution.

Dont work on the THCud solution. First goto the Toma config, if you have steppers around.
I told you before. Please provide a picture of your wiring. Before and after.

It's a spool type relay so I hope it's all good. I do need to run a shielded cable to my float switch though.

I definitely want to upgrade torches ASAP, however I need this thing to make me some $$$ before I can justify the cost.

Lol, okay, I'll make a video of my whole wiring setup

Here's my controller, ready for testing. I'm excited to build a second machine that will be 100x better and address all of this current tables faults.

I'll start posting my machine HAL here soon for you guys.

Oh yeah, the motorcycle is an '82 Yamaha Virago XV920

Hi Snuggly,

Nice video. You have a nice voice also, it sound's relaxing.

Okey, if you have your machine working xyz and plasma start, you could do some test without a torch height control.

I prefer you start with this. After some test cutting, you post a video. And we will go on to the next level.

Lol, that wasn't the response I was expecting but I'll take it! Thank you. I'll be posting more regularly now that I have some things out of the way. Your advice is appreciated and I will follow it faithfully.

How should I designate in my machine files that my soft stops are NO?

I just got 100' of quad shielded coax just in case I have to rewire my Z axis.