Help with adding PlasmaC to base config + 7i76e

Are you also using the "new2.hal" file ? It is there, that should be removed.

I don't know what you're asking...I guess my answer is that I deleted the contents from my two machine folders and replaced them with the content given by phill. Whatever he gave me is now on my machine.

Plasmaguy wrote: You can find them in phill's most recent post ...he provided the files which I copied and pasted into my machine.

Right but you said you made changes, and Phill’s had “your pin here” that surely you changed.

Help me (us) help you.

1. Took phill's unedited code
2. replaced the content in the existing 2 files in my machine folder (which were generated by plasmac config) with phill's codes
3. after got errors, resolved the first error by editing the erroneous "h2m" with "hm2"
4. next error resolved i edited the encoder scales from -1 (as phill put in the file he posted) to +1 as tommylight said.
5. No other changes have occured.

Plasmaguy wrote: The only edits I've done since replacing the existing 2 files in my machine folder (generated by plasmac config) were to replace the obviously erroneous "h2m" with "hm2" in the code phill gave me, and to change the scales from -1 (as phill put in the file he posted) to +1 as tommylight said.

Did you run configurator at all?

yes i run configurator on my existing/functional base machine files set up with pncconfig.