PlasmaC Voltage Divider

Put 1 resistor on each cable, much safer.
www.mouser.de/ProductDetail/Vishay-Dale/...rmWJGO8s8TXMfjOoM%3D

Thanks.

Is it also possible to put the voltage-divider (2 resistors) outside the plasma-source in a separate box to avoid warranty loss of the new machine ?

And where can I get a plug to connect to the THC and Start-socket of the Stahlwerk machine to connect it to my cnc-system ? Is it included when buying the stahlwerk 70P ?

Thanks. I bought the Stahlwerk 70 P Plasmacutter.

Would this resistor also be possible (Mouser wants 20€ shipping) ?

www.reichelt.de/de/de/shop/produkt/wider...7_250_mw_0_1_-237509

Inside a box outside the pasma-source to avoid warranty-loss (7 Years warranty on the machine).

I would choose a higher wattage/higher maximum voltage resistor
 

Is this resistor better with 0,6w ?

www.reichelt.de/de/de/shop/produkt/wider...207_0_6_w_0_1_-12752

2 x 2watt is correct I believe