Apologies for Clumsy writing on my part,
I understand the issue and thanks for the clarification Tommy.

Plan is for a closed loop system
Used the pncconf only havent changed anything yet

So far its working now the rest ill have to do by testing 
Thanks for the help again

i have tied 3 times but i now think some of my faults are regarding www.forum.linuxcnc.org/9-installing-linu...cnc-in-november-2025
and so

That link says modbus. also the price is more than 3 full ethercat ac servo kits.

But still neat.

I'm 4200km from vancouver.

Are you intending on using encoder feedback?

If not (and this is an open loop step/dir system), you should not connect
the encoder pins (  like hm2_7i95.0.encoder.00.position ) to the axis feedback
signals (like x-pos-fb )

And vice versa, if you ARE intending to use encoder feedback, you should not connect
the steogen pins (  like hm2_7i95.0.stepgen.00.position ) to the axis feedback
signals (like x-pos-fb )

 

Thanks Andy, I'll go hunting for that missing connection and report back.

ok that worked.
But it gives me a different error now, i do understand what it wants from me but thats it (total beginner here Sorry)

Debug file information:
Note: Using POSIX realtime
./Sindre_Mill.hal:86: Signal 'x-pos-fb' can not add OUT pin 'hm2_7i95.0.encoder.00.position', it already has OUT pin 'hm2_7i95.0.stepgen.00.position-fb'
7346

File is attached
if there is any other file you kneed let me know
Thanks

I posted it ti the gethub, hopefully they can help me get this thing going..

I asume like this ?

I just tried to install probe basic and was able to but when i try to launch it i get the following error Traceback (most recent call last):File "/usr/bin/probe_basic", line 8, in <module>sys.exit(main())~~~~^^File "/usr/lib/python3/dist-packages/probe_basic/__init__.py", line 20, in mainqtpyvcp.run_vcp(opts, VCP_CONFIG_FILE)~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^File "/usr/lib/python3/dist-packages/qtpyvcp/__init__.py", line 26, in run_vcprun(*args, **kwargs)~~~^^^^^^^^^^^^^^^^^File "/usr/lib/python3/dist-packages/qtpyvcp/app/__init__.py", line 129, in runlaunch_application(opts, config)~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^File "/usr/lib/python3/dist-packages/qtpyvcp/app/launcher.py", line 70, in launch_applicationapp = _initialize_object_from_dict(config)File "/usr/lib/python3/dist-packages/qtpyvcp/app/launcher.py", line 205, in _initialize_object_from_dictobj = _get_object_by_referance(provider)File "/usr/lib/python3/dist-packages/qtpyvcp/app/launcher.py", line 193, in _get_object_by_referancereturn getattr(importlib.import_module(modname), attrname)~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^File "/usr/lib/python3.13/importlib/__init__.py", line 88, in import_modulereturn _bootstrap._gcd_import(name[level:], package, level)~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^File "<frozen importlib._bootstrap>", line 1387, in _gcd_importFile "<frozen importlib._bootstrap>", line 1360, in _find_and_loadFile "<frozen importlib._bootstrap>", line 1331, in _find_and_load_unlockedFile "<frozen importlib._bootstrap>", line 935, in _load_unlockedFile "<frozen importlib._bootstrap_external>", line 1026, in exec_moduleFile "<frozen importlib._bootstrap>", line 488, in _call_with_frames_removedFile "/usr/lib/python3/dist-packages/qtpyvcp/app/application.py", line 7, in <module>import impModuleNotFoundError: No module named 'imp'
 p, li { white-space: pre-wrap; }

after unfortunatly I receive the same error mesage: unfortunatly in german but basically libtool autoconf, ... can not be installed
I tried to install libtool individually: and I get the error message: (my translation)