Have been working on the S-curve, even when not posting here, YangYang is going to merge Ruckig, will see how mantainers react, it is MIT license, so we should be good, we don't need the pro version, and YangYang can fix it if needed, probably next week update on planner type 1
As for Planner Type 2 progress continues, I am now done with Feed Override phase, doing some cleaning up, and moving to Blending soon, arcs are working from curve9 from Tormach, planner type 2 also has ruckig but in uspace, which makes some things a bit more complex.
Progress is ongoing, thank you all for the support, and the testing, there will be new release to test probably next week.

Looks like the Trixie issues repo got nuked, does anyone know what happened?

When I try the command on the command line I get this error

efx_run.py : The term 'efx_run.py' is not recognized as the name of a cmdlet, function, script file, or operable
program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ efx_run.py seveni95t.xml --flow program --pgm_opts mode=jtag
+ ~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (efx_run.py:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException

I download the standalone programmer instead of the IDE.

I am using this JTAG,
www.amazon.com/dp/B0BKZ8X2C7?ref=ppx_yo2ov_dt_b_fed_asin_title

I am not sure how to connect
/RESET and /SS are these necessary?

This the error that I am getting.
According to efinity I should use bit files when using the JTAG and Hex when using SPI

Wed February 4 26 21:07:24 - Board Profile: Generic Board Profile Using FT4232
Wed February 4 26 21:07:26 - Valid device ID found: 0x00210A79
Wed February 4 26 21:07:26 - Board Profile: Generic Board Profile Using FT4232
Wed February 4 26 21:07:26 - Using FTDI URL (SPI = ftdi://0x0403:0x6011:1:3e/1, JTAG = ftdi://0x0403:0x6011:1:3e/2)
Wed February 4 26 21:07:26 - jtag programming started!
Wed February 4 26 21:07:26 - JTAG Programming on ftdi://0x0403:0x6011:1:3e/2
Wed February 4 26 21:07:27 - Programming 'C:/Users/srodriguez/Downloads/95tinit/95tinit/outflow/seveni95t.bit' via JTAG at freq 6.0 MHz
Wed February 4 26 21:07:27 - Device ID read from JTAG: 0x00210A79
Wed February 4 26 21:07:30 - ... finished with JTAG programming
Wed February 4 26 21:07:30 - Detecting device status...
Wed February 4 26 21:07:33 - Failure to configure was detected

royka wrote:

For those who like it, I've got an Armbian image ready with Linux 6.17 Cinnamon which is ready to go.
drive.google.com/drive/folders/1_WMbZC0k...ceNNI?usp=drive_link

Last core already isolated
Included sata overlay (which had to be adjusted)
LinuxCNC installed
HDMI audio works
GPU acceleration works
VPU acceleration doesn't work in the web browsers, 1080p on YouTube works fine
IRQ of ethernet automatically pinned to core 5
 

Greetings, it's great job you done! Can you suggest to run it on OrangePi 5 plus?

Our initialization script does the programming from the command line:

efx_run.py seveni95t.xml --flow program --pgm_opts mode=jtag

Pretty sure use this uses a .hex or .bit file (in the outflow directory)
 

the pin names in your XML are what are used in hal. Yours are completely different so it won't work. Bring them into line. 

Yes, I'm using 2.9.8 from 2.9.4 iso image,

there is a line.

raspi-firmware: missing /boot/firmware, did you forget to mout it ?
...　z50-raspi-firmware exited with return code 1



I'm not using raspberry pi, but N150 PC

What should I do ?

I do not think that I was able to program the FPGA.

I am stuck where programmer says "Device is in user mode!"

I do not know what is the next step

Did you manage to program the FPGA via JTAG?

This would be shown by the green LEDs flashing in sequence
and the link and speed LEDs lighting up on the 7I95T's RJ-45
jack.

Efinity software reported an error. After reviewing my wiring, I was able to make progress.

I can now connect via JTAG using the Efinity Programmer tool. When I click Start Program, it appears to detect the board, and I receive the message “Device is in user mode.”

At this point, I’m not sure what the next step should be.

I have jumpers W15 and W16 set to UP,UP position so I can attempt an Ethernet connection to 192.168.1.121 However, when I run the following command:

mesaflash --device Ethernet --addr 192.168.1.121 --verbose

No ETHERNET board found

Not sure, sounds like the PWM is not setup properly

Can you run your test (where you expect 1V)

and in a terminal type

halcmd show all | grep pwm > pwm.txt

and post pwm.txt here



 

Yes
The multimeter gave a jump to 0.5 volt in a glimpse . I don’t know for how long since the meter was set to store highest

I just tried to repeat the test.
This time the 0 was dead 0

Could it have any impact on the result that I also had the 24 v on the enable pin at the same time in the first test?