Ok Thank you

After looking at the arm64 Trixie repo it appears there are no packages available for mesaflash.
One option would to be build from source.
Or to manually download the bookworm version and install that.
As it is almost 12:00 am I fear I may not be able to respond in a timely manner.

With Imager version 1.9 it's ok.
Can I also ask what is the replacement for mesaflash --device 7c81 --addr /dev/spidev0.0 --spi --fallback --write.
I found:
halrun
halcmd: loadrt hostmot2
halcmd: loadrt hm2_rpspi
for reading (readhmid).
Or should I ask in a new forum?

Ich verstehe nicht. Wenn der Nullpunkt bei beiden Setups auf der selben Position ist, dann "müsste aber" alles normal funktionieren. Wenn der Nullpunkt für G54 für beide setups unterschiedlich ist (meine Beispielbilder oben) dann wäre es ja richtig, wenn die Maschine falsch fährt. 
 

Ist hier bei dem "operations" tab was verstellt?
 

 

Verified - adding the code M66 P0 L0 around all G38 did not eliminate the error. 2.9.7

So after booting without a password it is also not possible to change anything. But I will try an older version of Imager. Otherwise it offers an update to the new version quite aggressively.

As I said it can also be set via the first book wizard, but I'm at a loss as why RPi image doesn't allow you to set the customisations, all the while I have been building the various version that has never happened, I had to download the latest version on my Debian Dev machine.

http is fine
https does not appear to work

Well from my location on an island somewhere near the Indian Ocean/South Pacific Ocean.

Thanks for the answer, but that is not possible. Option Customisation is greyed out and inactive in RPi Imager version 2.0. ISO image was :image_2025-11-10-raspios-lcnc-2.9.7-6-trixie-arm64.zip

Ah I see, I was some what interrupted by The Hound whilst reading and responding, my apologies sir.

As per instructions you either set the password or username prior to writing the imagery via RPi-imager or you set the user name and password via the first boot wizard, exactly the same process as you would go through with a stock raspios image.
The change in the way the image was built was to make it easier for a user to setup thier wifi and locale, and to allow the user to select a username and password to their liking.

Hi,

After a few years I pulled out my RPi4 and Mesa 7c81 from the drawer again. I tried to install raspi os 2.9.7... And that's it. After a while of inactivity my screen locked and I was done. I searched the "entire" web, but I couldn't find the password for that awesome username anywhere.

Entschuldige bitte das ich gefragt habe.
Nicht jeder ist ein Genius wie du...

Hello,
Not sure to understand correctly:
You can have both TIM2 and TIM5 32bits encoders running in the same time right?
But it has to be on a custom board