Search Results (Searched for: )

  • rodw
01 Jan 2026 03:10
Replied by rodw on topic Fusion 360 Win 10 EOL
Well they could charge your credit card like they did for me! Took a bit to get that reversed...
Also cancelled my adobe subscription.

Unfortunately, I have to boot Windows to run the Anycubic Slicer for my 3d printer so I am not shuffling gcode and USB drives.
There was a time I knew Windows backwards, now I am a bit bamboozled by it!
  • Thllll
01 Jan 2026 02:55
Replied by Thllll on topic QtDragon M6 Remap Tool Measurement - Inconsistent/Wrong Offsets with VersaProbe
Same thing happening to me, nearly the same setup too, did you ever find a solution?
  • my1987toyota
01 Jan 2026 02:36
Replied by my1987toyota on topic Fusion 360 Win 10 EOL
rodw detesting Windows? No, that's not possible image missing /media/kunena/emoticons/laughing.png.  Unfortunately I am stuck with both Windows and Fusion 360 
at least for a little while longer anyway. But it does give me a unique opportunity to see what exactly Autodesk
does when the clock rolls over. Well I guess I will see in a few hours. LOL
  • rodw
01 Jan 2026 02:33
Replied by rodw on topic Ethercat random jitter fix
This is really awesome work. I would stick to the igc driver which is real time when generic isn't
But from what I am hearing, optimising for system and network latency will probably avoid the issue.
I have a video about that and one user reports he got latency down to about 6 usec following my tutorial.
I suspect by running a latency optimised system has meant I have never experienced this.
  • tommylight
01 Jan 2026 02:23
Replied by tommylight on topic screen blanking
You CAN disable completely screen saver and still have the monitor go off after a while, use "power options", they are not the same thing.
  • rodw
01 Jan 2026 02:20
Replied by rodw on topic Fusion 360 Win 10 EOL
Sorry not much help as I am in British Columbia, Canada ATM so  similar time zone to the OP (not 2026 yet!). I cancelled my F360 subscription and have been using Onshape to create STL files for 3D printing. I think when I get back  to needing CAD, I will try Freecad on Linux (Did I tell you I detest Windows?) There is collaboration between our devs and theirs starting with their tool handling API so I think it will be worth playing with.
  • rodw
01 Jan 2026 02:09
Replied by rodw on topic screen blanking

So the issue is the screensaver is doing what it is designed to do ?
I think so
  • my1987toyota
01 Jan 2026 01:00 - 01 Jan 2026 01:05
Replied by my1987toyota on topic Fusion 360 Win 10 EOL
Well it's almost 8:00pm  or 20:00 here in Florida. Just 4 hours to go. Some sporadic fireworks here and there. Though tonight
I think I will have a drink, not that I see much to celebrate. It just seems fitting given what 2025 has been.
  • unknown
01 Jan 2026 00:38
Replied by unknown on topic screen blanking
So the issue is the screensaver is doing what it is designed to do ?
  • xenon-alien
01 Jan 2026 00:16
Replied by xenon-alien on topic [ Vfdmod ] An easy VFD control over MODBUS RTU
Thank you for the files!
That is not a documentation, only a lot of not really understandable words.
The connection and reading I have tested.
Now i have to figure it out how to scale it correctly and how to transfer to the VFD the input commands.
  • nwallace
31 Dec 2025 23:54
Replied by nwallace on topic [ Vfdmod ] An easy VFD control over MODBUS RTU
Sorry, I am definitely not an expert in this. You can take a look at my config and the documentation here:
linuxcnc.org/docs/html/drivers/mb2hal.html
Attached is my mb2hal ini file and the spindle bits from my hal file. I am not an expert but I was able to figure it out just with the VFD manual and the documentation.
  • grandixximo
31 Dec 2025 23:53
Replied by grandixximo on topic How to fix "Queue is not empty after probing"
I just checked master has new option for

[TRAJ]
NO_PROBE_JOG_ERROR = 1

in the .ini file, you could use that to check if the issue goes away?

you have to make sure your version supports this, it's just been added 4 months ago
  • tommylight
31 Dec 2025 22:58
Replied by tommylight on topic Fusion 360 Win 10 EOL
Yeah, sorry, might have mixed you with PhillC, i have a very nasty habit of messing up names... and most probably you would too if you lived here where every person has one of 15-20 names used here. I was convinced this is my problem till about 15 years ago when i noticed i have no issues with complicated names that are not common here, but still the habit lingers ...
Also a non drinker.
23:58 here and the fireworks started....
Happy new year to all.
  • unknown
31 Dec 2025 22:11
Replied by unknown on topic Fusion 360 Win 10 EOL
Not I, I'm Linux only. Also a complete non-drinker, I had my share enough in my teens and early 20s.
  • tommylight
31 Dec 2025 21:20
Replied by tommylight on topic Fusion 360 Win 10 EOL

With that said I am sure it is already January 1st somewhere in the world . Has any one tried seeing if
Fusion 360 still works for them on Win 10?
RodW and "unknown" are in Australia so they are already in 2026, and i think both used Fusion360 at some point in time, and they both monitor the "recent topic" section of this forum, so maybe they chime in, granted new years day so might, might be hangover ... :)
Displaying 9241 - 9255 out of 11914 results.
Time to create page: 0.263 seconds
Powered by Kunena Forum