LinuxCnc logo

More
10 Aug 2022 18:27 #249468 by chris@cnc
Replied by chris@cnc on topic LinuxCnc logo
How about simple old book svg and put the language short name and one chip on top?
 
vector.me/browse/130485/old_book_with_blank_cover
 
Attachments:
The following user(s) said Thank You: AlexMagToast

Please Log in or Create an account to join the conversation.

More
11 Aug 2022 11:28 #249503 by AlexMagToast
Replied by AlexMagToast on topic LinuxCnc logo
Thanks for your suggestions,
rodw, andypugh and chris@cnc.
You are absoultely right about the Flags. I will provide what i come up with. Propably next week.
The following user(s) said Thank You: rodw, snowgoer540

Please Log in or Create an account to join the conversation.

More
14 Aug 2022 19:29 #249733 by Samas322
Replied by Samas322 on topic LinuxCnc logo
Hi everybody! I just made this if anybody is interested.. :)
Attachments:
The following user(s) said Thank You: tommylight, Clive S

Please Log in or Create an account to join the conversation.

More
14 Aug 2022 21:41 #249739 by tommylight
Replied by tommylight on topic LinuxCnc logo
Made this topic sticky so it is easier to find.
Now if i could find the wallpaper topic ...
The following user(s) said Thank You: rodw

Please Log in or Create an account to join the conversation.

More
26 Aug 2022 11:13 #250503 by AlexMagToast
Replied by AlexMagToast on topic LinuxCnc logo
Hi andypugh & everyone else,
I have played around with the idea of Chip reading the manuals. In the attachment i send you a preview of the first couple languages.

Please have a look and tell me, what you think. I will change it according to your feedback.

My thoughts so far are, safety glasses not needed here, so i removed them.
The text is the same Style as the LinuxCNC Banner.
Also i changed Chips eyes to look into the book.
I think the logos are going to be present in the dock in the handbook tab, rigth? so they are qute small. To have the text readable even as a small logo i didn't put it on the book, instead on the banner in front of Chip.

I am curious about your feedback,
since then,
Alex
The following user(s) said Thank You: tommylight, EW_CNC, snowgoer540

Please Log in or Create an account to join the conversation.

More
30 Aug 2022 12:20 #250772 by andypugh
Replied by andypugh on topic LinuxCnc logo
I like them, though the language should probably be written in the language and character set of the language, so "Français", "Deutsch" etc.
The following user(s) said Thank You: tommylight

Please Log in or Create an account to join the conversation.

More
27 Nov 2022 22:48 #257790 by AlexMagToast
Replied by AlexMagToast on topic LinuxCnc logo
hi, i'm sorry. i have not abandonned this, and will deliver at one point. rigth now i am just busy with other stuff. let me know it there is some timely pressure, and i will give it more prio.

Please Log in or Create an account to join the conversation.

Time to create page: 0.594 seconds
Powered by Kunena Forum