John thnx,
I have seen them but they are useless to me. I need drive wirings and hydro/pneu wiring, and even that i can figure out easily, it just takes to much time, and lately i am low on time. It is 7:45 AM here and i have not slept yet.
Anyway, Mesa cards should be ordered by now, have to do a Hurco BMC20P first, maybe a Murata-weider......something that got burnt to crisp, and maybe then Mazak.
Regards,
Tom
Just in case it helps: I helped with some details of the retrofit of a Weiler CNC lathe in Stuttgart last weekend, and made some improvements to the "carousel" HAL component as part of that. It now seems to work very well for some classes of lathe toolchanger. It no longer locks up and becomes useless if passed a tool-number of zero (!), it supports a strobe pin and parity checking and if you ask for tool 10 on an 8-tool changer you get position 2. This is one way to get two tools/offsets in one station of the changer.
It's been 3 years and still nothing ???
Oh how much i am disappointed at me !
Today i stumbled on it while cleaning the shop floor, so got to do some searches and found nothing useful, like wiring diagram of the relay boards as there must be a gazillion relays there with the wiring not accessible without detaching the panel, making it near impossible to test stuff while under power to figure out what does what and when and how and why .....
Soon...... or not !
I don't know if it will help, but I have a PDF copy of the wiring diagrams for a 1986 Mazak QT10 with T2 control. It's almost 240 pages and over 27 MB...too big to attach. Maybe email?
jj80909 wrote: I don't know if it will help, but I have a PDF copy of the wiring diagrams for a 1986 Mazak QT10 with T2 control. It's almost 240 pages and over 27 MB...too big to attach. Maybe email?
Thank you very much,
######################
just remove #.
