Forum Menu

Profile for tjamscad

Offline
  • User Type: User
  • Rank: Elite Member Elite Member
  • Register Date: 03 Dec 2012
  • Last login: 8 years 11 months ago
  • Time Zone: UTC +0:00
  • Local Time: 00:51
  • Posts: 238
  • Karma: 1
  • Profile views: 7
  • Thank you received: 1
  • Gender: Unknown
  • Birthdate: Unknown


tjamscad's recent posts (238 messages )

Subject Replies / Views Last Post
Category: Installing LinuxCNC
Topic started 9 years 5 months ago, by tjamscad
Last Post 9 years 5 months ago
by andypugh
Replies:4
Views:1802
Last Post by andypugh
9 years 5 months ago
Category: Installing LinuxCNC
Topic started 9 years 5 months ago, by tjamscad
Last Post 9 years 5 months ago
by andypugh
Replies:4
Views:1802
Last Post by andypugh
9 years 5 months ago
Category: Other User Interfaces
Topic started 9 years 8 months ago, by tjamscad
Last Post 9 years 7 months ago
by andypugh
Replies:13
Views:6064
Last Post by andypugh
9 years 7 months ago
Category: Other User Interfaces
Topic started 9 years 8 months ago, by tjamscad
Last Post 9 years 7 months ago
by andypugh
Replies:13
Views:6064
Last Post by andypugh
9 years 7 months ago
Category: Other User Interfaces
Topic started 9 years 8 months ago, by tjamscad
Last Post 9 years 7 months ago
by andypugh
Replies:13
Views:6064
Last Post by andypugh
9 years 7 months ago
Category: Installing LinuxCNC
Topic started 9 years 8 months ago, by tjamscad
Last Post 9 years 8 months ago
by Todd Zuercher
Replies:1
Views:1592
Last Post by Todd Zuercher
9 years 8 months ago
Category: Other User Interfaces
Topic started 9 years 8 months ago, by tjamscad
Last Post 9 years 7 months ago
by andypugh
Replies:13
Views:6064
Last Post by andypugh
9 years 7 months ago
Category: Other User Interfaces
Topic started 9 years 8 months ago, by tjamscad
Last Post 9 years 7 months ago
by andypugh
Replies:13
Views:6064
Last Post by andypugh
9 years 7 months ago
Category: Other User Interfaces
Topic started 9 years 8 months ago, by tjamscad
Last Post 9 years 7 months ago
by andypugh
Replies:13
Views:6064
Last Post by andypugh
9 years 7 months ago
Category: General LinuxCNC Questions
Topic started 9 years 10 months ago, by tjamscad
Last Post 9 years 8 months ago
by jmelson
Replies:90
Views:14.9k
Last Post by jmelson
9 years 8 months ago
Time to create page: 0.130 seconds
Powered by Kunena Forum