Format and type of data passed to Mesa Control Card from LCNC?

rene-dev
Offline
Senior Member

3 years 7 months ago #267170 by rene-dev

Replied by rene-dev on topic Format and type of data passed to Mesa Control Card from LCNC?

github.com/LinuxCNC/hostmot2-firmware/bl...ster/src/regmap#L226
github.com/LinuxCNC/linuxcnc/blob/master...a-hostmot2/hm2_eth.c
github.com/LinuxCNC/linuxcnc/blob/master...-hostmot2/hostmot2.c

The following user(s) said Thank You: Cyber

Please Log in or Create an account to join the conversation.

andypugh
Offline
Moderator

3 years 7 months ago #267593 by andypugh

Replied by andypugh on topic Format and type of data passed to Mesa Control Card from LCNC?

For your purposes that regmap file is probably OK, though it is fairly old and lacks some of the newer modules.
The latest version can be found at freeby.mesanet.com/regmap

Please Log in or Create an account to join the conversation.

Time to create page: 0.121 seconds