Forum Menu

Set program zero using XY positioning laser

More
1 year 2 months ago #333308 by rodw
Replied by rodw on topic Set program zero using XY positioning laser
Have a look at how Qtplasmac does it. Normally, you would home the machine, turn the laser on and jog the machine. When the laser is in position, press a GUI button  that sets the G54 offsets based on the XY difference between the tool and the laser. Then optionally, goto 0,0 to centre the tool over the laser position. You need to save those offsets somewhere, but best to do in the ini file.
eg:
[LASER]
laser-x 20
laser-y 30

Please Log in or Create an account to join the conversation.

More
1 year 2 months ago #333481 by scsmith1451
Replied by scsmith1451 on topic Set program zero using XY positioning laser
Thanks rodw,

I've added the following to my .ini file:

[LASER]
laser-offset-x = -3.2017
laser-offset-y = -0.2124

I've tried several ways that I could think of to reference these values in the gvcp-panel.ui, as CALL parameters to the EMC_Action_MDI widget without success.  I've also tried to just reference them in the auto-xy-zero.ngc file called by the EMC_Action_MDI widget without success.

A review of the online documentation has not been helpful either.

What is the correct method to pass them to the ngc file for execution?

Kind regards,

Please Log in or Create an account to join the conversation.

More
1 year 2 months ago #333493 by rodw
Replied by rodw on topic Set program zero using XY positioning laser
Sometimes you need to know where to looks in the docs. how to set a pin value from the ini file
linuxcnc.org/docs/html/config/ini-config.html#sub:ini:custom

Please Log in or Create an account to join the conversation.

More
1 year 2 months ago #333629 by scsmith1451
Replied by scsmith1451 on topic Set program zero using XY positioning laser
Still no go.  

Here are my ini variables:

[LASER]
laser-offset-x = -3.2017
laser-offset-y = -0.2124

Here is my oword macro:

o<auto-xy-zero> sub

;   ( Move table to program start)
    G91 G0 X#<_ini[LASER]laser-offset-x> Y#<_ini[LASER]laser-offset-y>
    G10 L20 P0 X0 Y0 A0        ( Set X/Y/A DROs to zero )

o<auto-xy-zero> endsub

m2

This is the EMC_Action_MDI class in the gvcp-panel.ui

  <object class="EMC_Action_MDI" id="auto-xy-zero">
    <property name="command">o&lt;auto-xy-zero&gt; call </property>
  </object>
.
.
.
and the related button configuration in the same file:

                  <object class="HAL_Button" id="auto-set-xy-zero">
                    <property name="label" translatable="yes">Auto X/Y Zero</property>
                    <property name="related-action">auto-xy-zero</property>
                    <property name="visible">True</property>
                    <property name="can-focus">True</property>
                    <property name="receives-default">True</property>
                  </object>

When the button is clicked, I get the following error message:

[img]data:image/png;base64,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[/img]

A close inspection of the error has [laser] rather that [LASER] which would account for the message if usage is case sensitive.

Otherwise, I have no idea why the ERROR message is being generated.

Also, before I tried to combine both the offset moves and zeroing the DRO, your guidance to home the machine, turn on the laser and then jog to the desired location worked like a charm. However, since I've tried to implement the oword macro, the machine is back to not allowing jogging with the laser on. No idea what may have caused that!

Any guidance would be greatly appreciated.

Regards,

 

Please Log in or Create an account to join the conversation.

More
1 year 2 months ago #333630 by scsmith1451
Replied by scsmith1451 on topic Set program zero using XY positioning laser
Sorry about the gibberish. The image I pasted looked ok before clicking <SUBMIT>. It reads:

"Named paramter #<_ini[laser]laser-offset-x> not defined"

Regards.

Please Log in or Create an account to join the conversation.

More
1 year 2 months ago #333764 by scsmith1451
Replied by scsmith1451 on topic Set program zero using XY positioning laser
After several attempt to use the _ini() variables in my macro to move the table to the x/y offset location, I've finally just hard coded the values into the macro.  While this is not the ideal implementation, it does keep the values in a single location should I need to modify them in the future.

At this point I now have all of my gvcp buttons working except the combo box to select the current coordinate system to use for a given job.  I'll work on that option at a later date.  The key frustration is the inability to jog once the laser is toggled.

This is particularly interesting in that both the spindle enable and the spindle coolant are enabled via relays as well and neither of them inhibit jogging after they are activated. 

Does anyone have any suggestions regarding why the laser might inhibit jogging? 

These are the HAL commands associated with the laser:

# *** Crosshair laser Toggle and LED ***
net machine-is-on => gladevcp.crosshair-ctl-active
net crosshair-toggle-out <= gladevcp.crosshair-toggle
net crosshair-toggle-out => hm2_5i25.0.7i76.0.0.output-02
net crosshair-toggle-out => gladevcp.crosshair-led

I don't see anything that might be interfering with jogging.

Spindle-enable and coolant-flood, (I'm using M8 to cool my spindle), are configured as follows:
# --- SPINDLE-ENABLE ---
net spindle-enable  =>     hm2_5i25.0.7i76.0.0.output-00

# --- COOLANT-FLOOD ---
net coolant-flood  =>     hm2_5i25.0.7i76.0.0.output-01

The main difference that I notice is that these function are activated by LCNC signals. Maybe there is something associate with these two signals that needs to be added to the laser activation process.

I'm open to any suggestions that might point me in the right direction to resolve this issue.

Kind regard,
 

Please Log in or Create an account to join the conversation.

Time to create page: 0.423 seconds
Powered by Kunena Forum