linuxcnc-esp32 Software Stepping over Ethernet Using ESP32

Bari
Topic Author
Offline
Platinum Member

09 Aug 2024 19:17 #307380 by Bari

Replied by Bari on topic linuxcnc-esp32 Software Stepping over Ethernet Using ESP32

Development Board Design Based on ESP32-P4 RISC-V SoC with Ethernet

linuxgizmos.com/olimex-showcases-develom...esp32-p4-risc-v-soc/

The following user(s) said Thank You: tommylight, Mecanix

Please Log in or Create an account to join the conversation.

Mecanix
Offline
Platinum Member

09 Aug 2024 23:53 #307390 by Mecanix

Replied by Mecanix on topic linuxcnc-esp32 Software Stepping over Ethernet Using ESP32

Yeah them awesome silicon. Received 2 (two) ESP32-P4NRW32 to prototype hardware with, looking forward integrating them into projects. Here's the pre-release official block diagram for it, the one advertised is kinda old.

CONF. Do NOT share those attachments, yet. For your eyes only.

The following user(s) said Thank You: tommylight

Please Log in or Create an account to join the conversation.

tommylight
Away
Moderator

14 Oct 2024 16:58 #312076 by tommylight

Replied by tommylight on topic linuxcnc-esp32 Software Stepping over Ethernet Using ESP32

What is the current state of this as i will be getting some W5500 to play with soon?
More importantly, any long term use results on reliability?
Thank you.

Please Log in or Create an account to join the conversation.

tommylight
Away
Moderator

22 Oct 2024 00:33 #312811 by tommylight

Replied by tommylight on topic linuxcnc-esp32 Software Stepping over Ethernet Using ESP32

Wez's project and discussion moved here
forum.linuxcnc.org/18-computer/51816-esp...en-usb-plug-and-play
He added a lot more functionality and speed !

Please Log in or Create an account to join the conversation.

Time to create page: 0.074 seconds