Remora - ethernet NVEM / EC300 / EC500 cnc board

Mate, on the previous page vpomerleau states he uses MCUExpresso and this is what plenty of previous people have tried.

Don't want to sound rude but you really need to read through the thread. People have been posting what they have used and the issues they've had. Pyocd is used because it is what we've had the most success with.

Thank you very much for your quick response and attention.

Hi everyone
I added a hall sensor to my spindle so I can do closed loop on the spindle of my mill, it's wired to the index pin. Does someone have done closed loop on the spindle with remora? On the top of that I have 2 gears on the spindle. Does someone have a Hal file that might work for my configuration. . I'm having a hard time finding about this on the other threads and I read this one like five time from start to end. Remora is a different beast than mesa cards. Thank you

Did you have this working on a Mesa card?

No but almost everything on this forum is about Mesa or parallel port.

That doesn't really matter, same rules apply, inputs are simply named differently.

ie: net spindle-index <= parport.0.pin-13-in
becomes: net spindle-index <= remora.input.13

This question is more Hal / linuxcnc related than Remora specifically.

linuxcnc.org/docs/2.5/html/examples/spindle.html is a good place to start.

There is a "gear change" component built in to linuxcnc as well. Worth a research.

If you wanted to start a new thread on this topic I'd be happy to work with you on this and other Hal related questions as it is something I am working on "slowly" as well.